sprintf

Returns a string produced according to the formatting string format.

The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().

Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:

1. An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
2. An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
3. An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
4. An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
5. An optional precision specifier in the form of a period (.) followed by an optional decimal digit string that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string. Additionally, the character to use when padding a number may optionally be specified between the period and the digit.

6. A type specifier that says what type the argument data should be treated as. Possible types:

   • % - a literal percent character. No argument is required.
   • b - the argument is treated as an integer, and presented as a binary number.
   • c - the argument is treated as an integer, and presented as the character with that ASCII value.
   • d - the argument is treated as an integer, and presented as a (signed) decimal number.
   • e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
   • E - like %e but uses uppercase letter (e.g. 1.2E+2).
   • f - the argument is treated as a float, and presented as a floating-point number (locale aware).
   • F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
   • g - shorter of %e and %f.
   • G - shorter of %E and %f.
   • o - the argument is treated as an integer, and presented as an octal number.
   • s - the argument is treated as and presented as a string.
   • u - the argument is treated as an integer, and presented as an unsigned decimal number.
   • x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
   • X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).

Variables will be co-erced to a suitable type for the specifier:

The format string supports argument numbering/swapping. Here is an example:

<?php
$num = 5;
$location = 'tree';

$format = 'There are %d monkeys in the %s';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %s contains %d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys.
           That\'s a nice %2$s full of %1$d monkeys.';
echo sprintf($format, $num, $location);
?>

n$ position specifier %

<?php
echo sprintf("%'.9d\n", 123);
echo sprintf("%'.09d\n", 123);
?>

......123
000000123

<?php
$format = 'The %2$s contains %1$04d monkeys';
echo sprintf($format, $num, $location);
?>

The tree contains 0005 monkeys

Note:

Attempting to use a position specifier greater than PHP_INT_MAX will result in sprintf() generating warnings.

The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().

Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:

1. An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
2. An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
3. An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
4. An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
5. An optional precision specifier in the form of a period (.) followed by an optional decimal digit string that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string. Additionally, the character to use when padding a number may optionally be specified between the period and the digit.

6. A type specifier that says what type the argument data should be treated as. Possible types:

   • % - a literal percent character. No argument is required.
   • b - the argument is treated as an integer, and presented as a binary number.
   • c - the argument is treated as an integer, and presented as the character with that ASCII value.
   • d - the argument is treated as an integer, and presented as a (signed) decimal number.
   • e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
   • E - like %e but uses uppercase letter (e.g. 1.2E+2).
   • f - the argument is treated as a float, and presented as a floating-point number (locale aware).
   • F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
   • g - shorter of %e and %f.
   • G - shorter of %E and %f.
   • o - the argument is treated as an integer, and presented as an octal number.
   • s - the argument is treated as and presented as a string.
   • u - the argument is treated as an integer, and presented as an unsigned decimal number.
   • x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
   • X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).

Variables will be co-erced to a suitable type for the specifier:

The format string supports argument numbering/swapping. Here is an example:

<?php
$num = 5;
$location = 'tree';

$format = 'There are %d monkeys in the %s';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %s contains %d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys.
           That\'s a nice %2$s full of %1$d monkeys.';
echo sprintf($format, $num, $location);
?>

n$ position specifier %

<?php
echo sprintf("%'.9d\n", 123);
echo sprintf("%'.09d\n", 123);
?>

......123
000000123

<?php
$format = 'The %2$s contains %1$04d monkeys';
echo sprintf($format, $num, $location);
?>

The tree contains 0005 monkeys

Note:

Attempting to use a position specifier greater than PHP_INT_MAX will result in sprintf() generating warnings.

The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().

Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:

1. An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
2. An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
3. An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
4. An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
5. An optional precision specifier in the form of a period (.) followed by an optional decimal digit string that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string. Additionally, the character to use when padding a number may optionally be specified between the period and the digit.

6. A type specifier that says what type the argument data should be treated as. Possible types:

   • % - a literal percent character. No argument is required.
   • b - the argument is treated as an integer, and presented as a binary number.
   • c - the argument is treated as an integer, and presented as the character with that ASCII value.
   • d - the argument is treated as an integer, and presented as a (signed) decimal number.
   • e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
   • E - like %e but uses uppercase letter (e.g. 1.2E+2).
   • f - the argument is treated as a float, and presented as a floating-point number (locale aware).
   • F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
   • g - shorter of %e and %f.
   • G - shorter of %E and %f.
   • o - the argument is treated as an integer, and presented as an octal number.
   • s - the argument is treated as and presented as a string.
   • u - the argument is treated as an integer, and presented as an unsigned decimal number.
   • x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
   • X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).

Variables will be co-erced to a suitable type for the specifier:

The format string supports argument numbering/swapping. Here is an example:

<?php
$num = 5;
$location = 'tree';

$format = 'There are %d monkeys in the %s';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %s contains %d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys.
           That\'s a nice %2$s full of %1$d monkeys.';
echo sprintf($format, $num, $location);
?>

n$ position specifier %

<?php
echo sprintf("%'.9d\n", 123);
echo sprintf("%'.09d\n", 123);
?>

......123
000000123

<?php
$format = 'The %2$s contains %1$04d monkeys';
echo sprintf($format, $num, $location);
?>

The tree contains 0005 monkeys

Note:

Attempting to use a position specifier greater than PHP_INT_MAX will result in sprintf() generating warnings.

Returns a string produced according to the formatting string format.

<?php
$num = 5;
$location = 'tree';

$format = 'There are %d monkeys in the %s';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %s contains %d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys';
echo sprintf($format, $num, $location);
?>

<?php
$format = 'The %2$s contains %1$d monkeys.
           That\'s a nice %2$s full of %1$d monkeys.';
echo sprintf($format, $num, $location);
?>

<?php
echo sprintf("%'.9d\n", 123);
echo sprintf("%'.09d\n", 123);
?>

......123
000000123

<?php
$format = 'The %2$s contains %1$04d monkeys';
echo sprintf($format, $num, $location);
?>

The tree contains 0005 monkeys

<?php
$n =  43951789;
$u = -43951789;
$c = 65; // ASCII 65 is 'A'

// notice the double %%, this prints a literal '%' character
printf("%%b = '%b'\n", $n); // binary representation
printf("%%c = '%c'\n", $c); // print the ascii character, same as chr() function
printf("%%d = '%d'\n", $n); // standard integer representation
printf("%%e = '%e'\n", $n); // scientific notation
printf("%%u = '%u'\n", $n); // unsigned integer representation of a positive integer
printf("%%u = '%u'\n", $u); // unsigned integer representation of a negative integer
printf("%%f = '%f'\n", $n); // floating point representation
printf("%%o = '%o'\n", $n); // octal representation
printf("%%s = '%s'\n", $n); // string representation
printf("%%x = '%x'\n", $n); // hexadecimal representation (lower-case)
printf("%%X = '%X'\n", $n); // hexadecimal representation (upper-case)

printf("%%+d = '%+d'\n", $n); // sign specifier on a positive integer
printf("%%+d = '%+d'\n", $u); // sign specifier on a negative integer
?>

%b = '10100111101010011010101101'
%c = 'A'
%d = '43951789'
%e = '4.39518e+7'
%u = '43951789'
%u = '4251015507'
%f = '43951789.000000'
%o = '247523255'
%s = '43951789'
%x = '29ea6ad'
%X = '29EA6AD'
%+d = '+43951789'
%+d = '-43951789'

<?php
$s = 'monkey';
$t = 'many monkeys';

printf("[%s]\n",      $s); // standard string output
printf("[%10s]\n",    $s); // right-justification with spaces
printf("[%-10s]\n",   $s); // left-justification with spaces
printf("[%010s]\n",   $s); // zero-padding works on strings too
printf("[%'#10s]\n",  $s); // use the custom padding character '#'
printf("[%10.10s]\n", $t); // left-justification but with a cutoff of 10 characters
?>

[monkey]
[    monkey]
[monkey    ]
[0000monkey]
[####monkey]
[many monke]

<?php
$isodate = sprintf("%04d-%02d-%02d", $year, $month, $day);
?>

<?php
$money1 = 68.75;
$money2 = 54.35;
$money = $money1 + $money2;
// echo $money will output "123.1";
$formatted = sprintf("%01.2f", $money);
// echo $formatted will output "123.10"
?>

<?php
$number = 362525200;

echo sprintf("%.3e", $number); // outputs 3.625e+8
?>

printf() -

sscanf() -

fscanf() -

vsprintf() -

number_format() -