Edit
In Place Editing Advanced Editing

docker daemon

daemon

Usage: docker daemon [OPTIONS]

A self-sufficient runtime for linux containers.

Options:
  --api-cors-header=""                   Set CORS headers in the remote API
  --authorization-plugin=[]              Set authorization plugins to load
  -b, --bridge=""                        Attach containers to a network bridge
  --bip=""                               Specify network bridge IP
  --cgroup-parent=                       Set parent cgroup for all containers
  --cluster-store=""                     URL of the distributed storage backend
  --cluster-advertise=""                 Address of the daemon instance on the cluster
  --cluster-store-opt=map[]              Set cluster options
  --config-file=/etc/docker/daemon.json  Daemon configuration file
  --containerd                           Path to containerd socket
  -D, --debug                            Enable debug mode
  --default-gateway=""                   Container default gateway IPv4 address
  --default-gateway-v6=""                Container default gateway IPv6 address
  --dns=[]                               DNS server to use
  --dns-opt=[]                           DNS options to use
  --dns-search=[]                        DNS search domains to use
  --default-ulimit=[]                    Set default ulimit settings for containers
  --exec-opt=[]                          Set runtime execution options
  --exec-root="/var/run/docker"          Root directory for execution state files
  --fixed-cidr=""                        IPv4 subnet for fixed IPs
  --fixed-cidr-v6=""                     IPv6 subnet for fixed IPs
  -G, --group="docker"                   Group for the unix socket
  -g, --graph="/var/lib/docker"          Root of the Docker runtime
  -H, --host=[]                          Daemon socket(s) to connect to
  --help                                 Print usage
  --icc=true                             Enable inter-container communication
  --insecure-registry=[]                 Enable insecure registry communication
  --ip=0.0.0.0                           Default IP when binding container ports
  --ip-forward=true                      Enable net.ipv4.ip_forward
  --ip-masq=true                         Enable IP masquerading
  --iptables=true                        Enable addition of iptables rules
  --ipv6                                 Enable IPv6 networking
  -l, --log-level="info"                 Set the logging level
  --label=[]                             Set key=value labels to the daemon
  --log-driver="json-file"               Default driver for container logs
  --log-opt=[]                           Log driver specific options
  --mtu=0                                Set the containers network MTU
  --disable-legacy-registry              Do not contact legacy registries
  -p, --pidfile="/var/run/docker.pid"    Path to use for daemon PID file
  --raw-logs                             Full timestamps without ANSI coloring
  --registry-mirror=[]                   Preferred Docker registry mirror
  -s, --storage-driver=""                Storage driver to use
  --selinux-enabled                      Enable selinux support
  --storage-opt=[]                       Set storage driver options
  --tls                                  Use TLS; implied by --tlsverify
  --tlscacert="~/.docker/ca.pem"         Trust certs signed only by this CA
  --tlscert="~/.docker/cert.pem"         Path to TLS certificate file
  --tlskey="~/.docker/key.pem"           Path to TLS key file
  --tlsverify                            Use TLS and verify the remote
  --userns-remap="default"               Enable user namespace remapping
  --userland-proxy=true                  Use userland proxy for loopback traffic

Options with [] may be specified multiple times.

The Docker daemon is the persistent process that manages containers. Docker uses the same binary for both the daemon and client. To run the daemon you type docker daemon.

To run the daemon with debug output, use docker daemon -D.

Daemon socket option

The Docker daemon can listen for Docker Remote API requests via three different types of Socket: unix, tcp, and fd.

By default, a unix domain socket (or IPC socket) is created at /var/run/docker.sock, requiring either root permission, or docker group membership.

If you need to access the Docker daemon remotely, you need to enable the tcp Socket. Beware that the default setup provides un-encrypted and un-authenticated direct access to the Docker daemon - and should be secured either using the built in HTTPS encrypted socket, or by putting a secure web proxy in front of it. You can listen on port 2375 on all network interfaces with -H tcp://0.0.0.0:2375, or on a particular network interface using its IP address: -H tcp://192.168.59.103:2375. It is conventional to use port 2375 for un-encrypted, and port 2376 for encrypted communication with the daemon.

Note: If you’re using an HTTPS encrypted socket, keep in mind that only TLS1.0 and greater are supported. Protocols SSLv3 and under are not supported anymore for security reasons.

On Systemd based systems, you can communicate with the daemon via Systemd socket activation, use docker daemon -H fd://. Using fd:// will work perfectly for most setups but you can also specify individual sockets: docker daemon -H fd://3. If the specified socket activated files aren’t found, then Docker will exit. You can find examples of using Systemd socket activation with Docker and Systemd in the Docker source tree.

You can configure the Docker daemon to listen to multiple sockets at the same time using multiple -H options:

# listen using the default unix socket, and on 2 specific IP addresses on this host.
docker daemon -H unix:///var/run/docker.sock -H tcp://192.168.59.106 -H tcp://10.10.10.2

The Docker client will honor the DOCKER_HOST environment variable to set the -H flag for the client.

$ docker -H tcp://0.0.0.0:2375 ps
# or
$ export DOCKER_HOST="tcp://0.0.0.0:2375"
$ docker ps
# both are equal

Setting the DOCKER_TLS_VERIFY environment variable to any value other than the empty string is equivalent to setting the --tlsverify flag. The following are equivalent:

$ docker --tlsverify ps
# or
$ export DOCKER_TLS_VERIFY=1
$ docker ps

The Docker client will honor the HTTP_PROXY, HTTPS_PROXY, and NO_PROXY environment variables (or the lowercase versions thereof). HTTPS_PROXY takes precedence over HTTP_PROXY.

Daemon storage-driver option

The Docker daemon has support for several different image layer storage drivers: aufs, devicemapper, btrfs, zfs and overlay.

The aufs driver is the oldest, but is based on a Linux kernel patch-set that is unlikely to be merged into the main kernel. These are also known to cause some serious kernel crashes. However, aufs is also the only storage driver that allows containers to share executable and shared library memory, so is a useful choice when running thousands of containers with the same program or libraries.

The devicemapper driver uses thin provisioning and Copy on Write (CoW) snapshots. For each devicemapper graph location – typically /var/lib/docker/devicemapper – a thin pool is created based on two block devices, one for data and one for metadata. By default, these block devices are created automatically by using loopback mounts of automatically created sparse files. Refer to Storage driver options below for a way how to customize this setup. ~jpetazzo/Resizing Docker containers with the Device Mapper plugin article explains how to tune your existing setup without the use of options.

The btrfs driver is very fast for docker build - but like devicemapper does not share executable memory between devices. Use docker daemon -s btrfs -g /mnt/btrfs_partition.

The zfs driver is probably not as fast as btrfs but has a longer track record on stability. Thanks to Single Copy ARC shared blocks between clones will be cached only once. Use docker daemon -s zfs. To select a different zfs filesystem set zfs.fsname option as described in Storage driver options.

The overlay is a very fast union filesystem. It is now merged in the main Linux kernel as of 3.18.0. Call docker daemon -s overlay to use it.

Note: As promising as overlay is, the feature is still quite young and should not be used in production. Most notably, using overlay can cause excessive inode consumption (especially as the number of images grows), as well as being incompatible with the use of RPMs.

Note: It is currently unsupported on btrfs or any Copy on Write filesystem and should only be used over ext4 partitions.

Storage driver options

Particular storage-driver can be configured with options specified with --storage-opt flags. Options for devicemapper are prefixed with dm and options for zfs start with zfs.

  • dm.thinpooldev

    Specifies a custom block storage device to use for the thin pool.

    If using a block device for device mapper storage, it is best to use lvm to create and manage the thin-pool volume. This volume is then handed to Docker to exclusively create snapshot volumes needed for images and containers.

    Managing the thin-pool outside of Engine makes for the most feature-rich method of having Docker utilize device mapper thin provisioning as the backing storage for Docker containers. The highlights of the lvm-based thin-pool management feature include: automatic or interactive thin-pool resize support, dynamically changing thin-pool features, automatic thinp metadata checking when lvm activates the thin-pool, etc.

    As a fallback if no thin pool is provided, loopback files are created. Loopback is very slow, but can be used without any pre-configuration of storage. It is strongly recommended that you do not use loopback in production. Ensure your Engine daemon has a --storage-opt dm.thinpooldev argument provided.

    Example use:

    $ docker daemon \
      --storage-opt dm.thinpooldev=/dev/mapper/thin-pool

  • dm.basesize

    Specifies the size to use when creating the base device, which limits the size of images and containers. The default value is 10G. Note, thin devices are inherently “sparse”, so a 10G device which is mostly empty doesn’t use 10 GB of space on the pool. However, the filesystem will use more space for the empty case the larger the device is.

    The base device size can be increased at daemon restart which will allow all future images and containers (based on those new images) to be of the new base device size.

    Example use:

    $ docker daemon --storage-opt dm.basesize=50G

    This will increase the base device size to 50G. The Docker daemon will throw an error if existing base device size is larger than 50G. A user can use this option to expand the base device size however shrinking is not permitted.

    This value affects the system-wide “base” empty filesystem that may already be initialized and inherited by pulled images. Typically, a change to this value requires additional steps to take effect:

    $ sudo service docker stop
$ sudo rm -rf /var/lib/docker
$ sudo service docker start

    Example use:

    $ docker daemon --storage-opt dm.basesize=20G

  • dm.loopdatasize

    Note: This option configures devicemapper loopback, which should not be used in production.

    Specifies the size to use when creating the loopback file for the “data” device which is used for the thin pool. The default size is 100G. The file is sparse, so it will not initially take up this much space.

    Example use:

    $ docker daemon --storage-opt dm.loopdatasize=200G

  • dm.loopmetadatasize

    Note: This option configures devicemapper loopback, which should not be used in production.

    Specifies the size to use when creating the loopback file for the “metadata” device which is used for the thin pool. The default size is 2G. The file is sparse, so it will not initially take up this much space.

    Example use:

    $ docker daemon --storage-opt dm.loopmetadatasize=4G

  • dm.fs

    Specifies the filesystem type to use for the base device. The supported options are “ext4” and “xfs”. The default is “xfs”

    Example use:

    $ docker daemon --storage-opt dm.fs=ext4

  • dm.mkfsarg

    Specifies extra mkfs arguments to be used when creating the base device.

    Example use:

    $ docker daemon --storage-opt "dm.mkfsarg=-O ^has_journal"

  • dm.mountopt

    Specifies extra mount options used when mounting the thin devices.

    Example use:

    $ docker daemon --storage-opt dm.mountopt=nodiscard

  • dm.datadev

    (Deprecated, use dm.thinpooldev)

    Specifies a custom blockdevice to use for data for the thin pool.

    If using a block device for device mapper storage, ideally both datadev and metadatadev should be specified to completely avoid using the loopback device.

    Example use:

    $ docker daemon \
      --storage-opt dm.datadev=/dev/sdb1 \
      --storage-opt dm.metadatadev=/dev/sdc1

  • dm.metadatadev

    (Deprecated, use dm.thinpooldev)

    Specifies a custom blockdevice to use for metadata for the thin pool.

    For best performance the metadata should be on a different spindle than the data, or even better on an SSD.

    If setting up a new metadata pool it is required to be valid. This can be achieved by zeroing the first 4k to indicate empty metadata, like this:

    $ dd if=/dev/zero of=$metadata_dev bs=4096 count=1

    Example use:

    $ docker daemon \
      --storage-opt dm.datadev=/dev/sdb1 \
      --storage-opt dm.metadatadev=/dev/sdc1

  • dm.blocksize

    Specifies a custom blocksize to use for the thin pool. The default blocksize is 64K.

    Example use:

    $ docker daemon --storage-opt dm.blocksize=512K

  • dm.blkdiscard

    Enables or disables the use of blkdiscard when removing devicemapper devices. This is enabled by default (only) if using loopback devices and is required to resparsify the loopback file on image/container removal.

    Disabling this on loopback can lead to much faster container removal times, but will make the space used in /var/lib/docker directory not be returned to the system for other use when containers are removed.

    Example use:

    $ docker daemon --storage-opt dm.blkdiscard=false

  • dm.override_udev_sync_check

    Overrides the udev synchronization checks between devicemapper and udev. udev is the device manager for the Linux kernel.

    To view the udev sync support of a Docker daemon that is using the devicemapper driver, run:

    $ docker info
[...]
Udev Sync Supported: true
[...]

    When udev sync support is true, then devicemapper and udev can coordinate the activation and deactivation of devices for containers.

    When udev sync support is false, a race condition occurs between thedevicemapper and udev during create and cleanup. The race condition results in errors and failures. (For information on these failures, see docker#4036)

    To allow the docker daemon to start, regardless of udev sync not being supported, set dm.override_udev_sync_check to true:

    $ docker daemon --storage-opt dm.override_udev_sync_check=true

    When this value is true, the devicemapper continues and simply warns you the errors are happening.

    Note: The ideal is to pursue a docker daemon and environment that does support synchronizing with udev. For further discussion on this topic, see docker#4036. Otherwise, set this flag for migrating existing Docker daemons to a daemon with a supported environment.

  • dm.use_deferred_removal

    Enables use of deferred device removal if libdm and the kernel driver support the mechanism.

    Deferred device removal means that if device is busy when devices are being removed/deactivated, then a deferred removal is scheduled on device. And devices automatically go away when last user of the device exits.

    For example, when a container exits, its associated thin device is removed. If that device has leaked into some other mount namespace and can’t be removed, the container exit still succeeds and this option causes the system to schedule the device for deferred removal. It does not wait in a loop trying to remove a busy device.

    Example use:

    $ docker daemon --storage-opt dm.use_deferred_removal=true

  • dm.use_deferred_deletion

    Enables use of deferred device deletion for thin pool devices. By default, thin pool device deletion is synchronous. Before a container is deleted, the Docker daemon removes any associated devices. If the storage driver can not remove a device, the container deletion fails and daemon returns.

    Error deleting container: Error response from daemon: Cannot destroy container

    To avoid this failure, enable both deferred device deletion and deferred device removal on the daemon.

    $ docker daemon \
      --storage-opt dm.use_deferred_deletion=true \
      --storage-opt dm.use_deferred_removal=true

    With these two options enabled, if a device is busy when the driver is deleting a container, the driver marks the device as deleted. Later, when the device isn’t in use, the driver deletes it.

    In general it should be safe to enable this option by default. It will help when unintentional leaking of mount point happens across multiple mount namespaces.

  • dm.min_free_space

    Specifies the min free space percent in a thin pool require for new device creation to succeed. This check applies to both free data space as well as free metadata space. Valid values are from 0% - 99%. Value 0% disables free space checking logic. If user does not specify a value for this option, the Engine uses a default value of 10%.

    Whenever a new a thin pool device is created (during docker pull or during container creation), the Engine checks if the minimum free space is available. If sufficient space is unavailable, then device creation fails and any relevant docker operation fails.

    To recover from this error, you must create more free space in the thin pool to recover from the error. You can create free space by deleting some images and containers from the thin pool. You can also add more storage to the thin pool.

    To add more space to a LVM (logical volume management) thin pool, just add more storage to the volume group container thin pool; this should automatically resolve any errors. If your configuration uses loop devices, then stop the Engine daemon, grow the size of loop files and restart the daemon to resolve the issue.

    Example use:

    $ docker daemon --storage-opt dm.min_free_space=10%

Currently supported options of zfs:

  • zfs.fsname

    Set zfs filesystem under which docker will create its own datasets. By default docker will pick up the zfs filesystem where docker graph (/var/lib/docker) is located.

    Example use:

    $ docker daemon -s zfs --storage-opt zfs.fsname=zroot/docker

Docker runtime execution options

The Docker daemon relies on a OCI compliant runtime (invoked via the containerd daemon) as its interface to the Linux kernel namespaces, cgroups, and SELinux.

Options for the runtime

You can configure the runtime using options specified with the --exec-opt flag. All the flag’s options have the native prefix. A single native.cgroupdriver option is available.

The native.cgroupdriver option specifies the management of the container’s cgroups. You can specify only specify cgroupfs or systemd. If you specify systemd and it is not available, the system errors out. If you omit the native.cgroupdriver option,cgroupfs is used.

This example sets the cgroupdriver to systemd:

$ sudo docker daemon --exec-opt native.cgroupdriver=systemd

Setting this option applies to all containers the daemon launches.

Also Windows Container makes use of --exec-opt for special purpose. Docker user can specify default container isolation technology with this, for example:

$ docker daemon --exec-opt isolation=hyperv

Will make hyperv the default isolation technology on Windows, without specifying isolation value on daemon start, Windows isolation technology will default to process.

Daemon DNS options

To set the DNS server for all Docker containers, use docker daemon --dns 8.8.8.8.

To set the DNS search domain for all Docker containers, use docker daemon --dns-search example.com.

Insecure registries

Docker considers a private registry either secure or insecure. In the rest of this section, registry is used for private registry, and myregistry:5000 is a placeholder example for a private registry.

A secure registry uses TLS and a copy of its CA certificate is placed on the Docker host at /etc/docker/certs.d/myregistry:5000/ca.crt. An insecure registry is either not using TLS (i.e., listening on plain text HTTP), or is using TLS with a CA certificate not known by the Docker daemon. The latter can happen when the certificate was not found under /etc/docker/certs.d/myregistry:5000/, or if the certificate verification failed (i.e., wrong CA).

By default, Docker assumes all, but local (see local registries below), registries are secure. Communicating with an insecure registry is not possible if Docker assumes that registry is secure. In order to communicate with an insecure registry, the Docker daemon requires --insecure-registry in one of the following two forms:

  • --insecure-registry myregistry:5000 tells the Docker daemon that myregistry:5000 should be considered insecure.
  • --insecure-registry 10.1.0.0/16 tells the Docker daemon that all registries whose domain resolve to an IP address is part of the subnet described by the CIDR syntax, should be considered insecure.

The flag can be used multiple times to allow multiple registries to be marked as insecure.

If an insecure registry is not marked as insecure, docker pull, docker push, and docker search will result in an error message prompting the user to either secure or pass the --insecure-registry flag to the Docker daemon as described above.

Local registries, whose IP address falls in the 127.0.0.0/8 range, are automatically marked as insecure as of Docker 1.3.2. It is not recommended to rely on this, as it may change in the future.

Enabling --insecure-registry, i.e., allowing un-encrypted and/or untrusted communication, can be useful when running a local registry. However, because its use creates security vulnerabilities it should ONLY be enabled for testing purposes. For increased security, users should add their CA to their system’s list of trusted CAs instead of enabling --insecure-registry.

Legacy Registries

Enabling --disable-legacy-registry forces a docker daemon to only interact with registries which support the V2 protocol. Specifically, the daemon will not attempt push, pull and login to v1 registries. The exception to this is search which can still be performed on v1 registries.

Running a Docker daemon behind an HTTPS_PROXY

When running inside a LAN that uses an HTTPS proxy, the Docker Hub certificates will be replaced by the proxy’s certificates. These certificates need to be added to your Docker host’s configuration:

  1. Install the ca-certificates package for your distribution
  2. Ask your network admin for the proxy’s CA certificate and append them to /etc/pki/tls/certs/ca-bundle.crt
  3. Then start your Docker daemon with HTTPS_PROXY=http://username:password@proxy:port/ docker daemon. The username: and password@ are optional - and are only needed if your proxy is set up to require authentication.

This will only add the proxy and authentication to the Docker daemon’s requests - your docker builds and running containers will need extra configuration to use the proxy

Default Ulimits

--default-ulimit allows you to set the default ulimit options to use for all containers. It takes the same options as --ulimit for docker run. If these defaults are not set, ulimit settings will be inherited, if not set on docker run, from the Docker daemon. Any --ulimit options passed to docker run will overwrite these defaults.

Be careful setting nproc with the ulimit flag as nproc is designed by Linux to set the maximum number of processes available to a user, not to a container. For details please check the run reference.

Nodes discovery

The --cluster-advertise option specifies the host:port or interface:port combination that this particular daemon instance should use when advertising itself to the cluster. The daemon is reached by remote hosts through this value. If you specify an interface, make sure it includes the IP address of the actual Docker host. For Engine installation created through docker-machine, the interface is typically eth1.

The daemon uses libkv to advertise the node within the cluster. Some key-value backends support mutual TLS. To configure the client TLS settings used by the daemon can be configured using the --cluster-store-opt flag, specifying the paths to PEM encoded files. For example:

docker daemon \
    --cluster-advertise 192.168.1.2:2376 \
    --cluster-store etcd://192.168.1.2:2379 \
    --cluster-store-opt kv.cacertfile=/path/to/ca.pem \
    --cluster-store-opt kv.certfile=/path/to/cert.pem \
    --cluster-store-opt kv.keyfile=/path/to/key.pem

The currently supported cluster store options are:

  • discovery.heartbeat

    Specifies the heartbeat timer in seconds which is used by the daemon as a keepalive mechanism to make sure discovery module treats the node as alive in the cluster. If not configured, the default value is 20 seconds.

  • discovery.ttl

    Specifies the ttl (time-to-live) in seconds which is used by the discovery module to timeout a node if a valid heartbeat is not received within the configured ttl value. If not configured, the default value is 60 seconds.

  • kv.cacertfile

    Specifies the path to a local file with PEM encoded CA certificates to trust

  • kv.certfile

    Specifies the path to a local file with a PEM encoded certificate. This certificate is used as the client cert for communication with the Key/Value store.

  • kv.keyfile

    Specifies the path to a local file with a PEM encoded private key. This private key is used as the client key for communication with the Key/Value store.

  • kv.path

    Specifies the path in the Key/Value store. If not configured, the default value is ‘docker/nodes’.

Access authorization

Docker’s access authorization can be extended by authorization plugins that your organization can purchase or build themselves. You can install one or more authorization plugins when you start the Docker daemon using the --authorization-plugin=PLUGIN_ID option.

docker daemon --authorization-plugin=plugin1 --authorization-plugin=plugin2,...

The PLUGIN_ID value is either the plugin’s name or a path to its specification file. The plugin’s implementation determines whether you can specify a name or path. Consult with your Docker administrator to get information about the plugins available to you.

Once a plugin is installed, requests made to the daemon through the command line or Docker’s remote API are allowed or denied by the plugin. If you have multiple plugins installed, at least one must allow the request for it to complete.

For information about how to create an authorization plugin, see authorization plugin section in the Docker extend section of this documentation.

Daemon user namespace options

The Linux kernel user namespace support provides additional security by enabling a process, and therefore a container, to have a unique range of user and group IDs which are outside the traditional user and group range utilized by the host system. Potentially the most important security improvement is that, by default, container processes running as the root user will have expected administrative privilege (with some restrictions) inside the container but will effectively be mapped to an unprivileged uid on the host.

When user namespace support is enabled, Docker creates a single daemon-wide mapping for all containers running on the same engine instance. The mappings will utilize the existing subordinate user and group ID feature available on all modern Linux distributions. The /etc/subuid and /etc/subgid files will be read for the user, and optional group, specified to the --userns-remap parameter. If you do not wish to specify your own user and/or group, you can provide default as the value to this flag, and a user will be created on your behalf and provided subordinate uid and gid ranges. This default user will be named dockremap, and entries will be created for it in /etc/passwd and /etc/group using your distro’s standard user and group creation tools.

Note: The single mapping per-daemon restriction is in place for now because Docker shares image layers from its local cache across all containers running on the engine instance. Since file ownership must be the same for all containers sharing the same layer content, the decision was made to map the file ownership on docker pull to the daemon’s user and group mappings so that there is no delay for running containers once the content is downloaded. This design preserves the same performance for docker pull, docker push, and container startup as users expect with user namespaces disabled.

Starting the daemon with user namespaces enabled

To enable user namespace support, start the daemon with the --userns-remap flag, which accepts values in the following formats:

  • uid
  • uid:gid
  • username
  • username:groupname

If numeric IDs are provided, translation back to valid user or group names will occur so that the subordinate uid and gid information can be read, given these resources are name-based, not id-based. If the numeric ID information provided does not exist as entries in /etc/passwd or /etc/group, daemon startup will fail with an error message.

Note: On Fedora 22, you have to touch the /etc/subuid and /etc/subgid files to have ranges assigned when users are created. This must be done before the --userns-remap option is enabled. Once these files exist, the daemon can be (re)started and range assignment on user creation works properly.

Example: starting with default Docker user management:

$ docker daemon --userns-remap=default

When default is provided, Docker will create - or find the existing - user and group named dockremap. If the user is created, and the Linux distribution has appropriate support, the /etc/subuid and /etc/subgid files will be populated with a contiguous 65536 length range of subordinate user and group IDs, starting at an offset based on prior entries in those files. For example, Ubuntu will create the following range, based on an existing user named user1 already owning the first 65536 range:

$ cat /etc/subuid
user1:100000:65536
dockremap:165536:65536

If you have a preferred/self-managed user with subordinate ID mappings already configured, you can provide that username or uid to the --userns-remap flag. If you have a group that doesn’t match the username, you may provide the gid or group name as well; otherwise the username will be used as the group name when querying the system for the subordinate group ID range.

Detailed information on subuid/subgid ranges

Given potential advanced use of the subordinate ID ranges by power users, the following paragraphs define how the Docker daemon currently uses the range entries found within the subordinate range files.

The simplest case is that only one contiguous range is defined for the provided user or group. In this case, Docker will use that entire contiguous range for the mapping of host uids and gids to the container process. This means that the first ID in the range will be the remapped root user, and the IDs above that initial ID will map host ID 1 through the end of the range.

From the example /etc/subuid content shown above, the remapped root user would be uid 165536.

If the system administrator has set up multiple ranges for a single user or group, the Docker daemon will read all the available ranges and use the following algorithm to create the mapping ranges:

  1. The range segments found for the particular user will be sorted by start ID ascending.
  2. Map segments will be created from each range in increasing value with a length matching the length of each segment. Therefore the range segment with the lowest numeric starting value will be equal to the remapped root, and continue up through host uid/gid equal to the range segment length. As an example, if the lowest segment starts at ID 1000 and has a length of 100, then a map of 1000 -> 0 (the remapped root) up through 1100 -> 100 will be created from this segment. If the next segment starts at ID 10000, then the next map will start with mapping 10000 -> 101 up to the length of this second segment. This will continue until no more segments are found in the subordinate files for this user.
  3. If more than five range segments exist for a single user, only the first five will be utilized, matching the kernel’s limitation of only five entries in /proc/self/uid_map and proc/self/gid_map.

Disable user namespace for a container

If you enable user namespaces on the daemon, all containers are started with user namespaces enabled. In some situations you might want to disable this feature for a container, for example, to start a privileged container (see user namespace known restrictions). To enable those advanced features for a specific container use --userns=host in the run/exec/create command. This option will completely disable user namespace mapping for the container’s user.

User namespace known restrictions

The following standard Docker features are currently incompatible when running a Docker daemon with user namespaces enabled:

  • sharing PID or NET namespaces with the host (--pid=host or --net=host)
  • A --readonly container filesystem (this is a Linux kernel restriction against remounting with modified flags of a currently mounted filesystem when inside a user namespace)
  • external (volume or graph) drivers which are unaware/incapable of using daemon user mappings
  • Using --privileged mode flag on docker run (unless also specifying --userns=host)

In general, user namespaces are an advanced feature and will require coordination with other capabilities. For example, if volumes are mounted from the host, file ownership will have to be pre-arranged if the user or administrator wishes the containers to have expected access to the volume contents.

Finally, while the root user inside a user namespaced container process has many of the expected admin privileges that go along with being the superuser, the Linux kernel has restrictions based on internal knowledge that this is a user namespaced process. The most notable restriction that we are aware of at this time is the inability to use mknod. Permission will be denied for device creation even as container root inside a user namespace.

Miscellaneous options

IP masquerading uses address translation to allow containers without a public IP to talk to other machines on the Internet. This may interfere with some network topologies and can be disabled with --ip-masq=false.

Docker supports softlinks for the Docker data directory (/var/lib/docker) and for /var/lib/docker/tmp. The DOCKER_TMPDIR and the data directory can be set like this:

DOCKER_TMPDIR=/mnt/disk2/tmp /usr/local/bin/docker daemon -D -g /var/lib/docker -H unix:// > /var/lib/docker-machine/docker.log 2>&1
# or
export DOCKER_TMPDIR=/mnt/disk2/tmp
/usr/local/bin/docker daemon -D -g /var/lib/docker -H unix:// > /var/lib/docker-machine/docker.log 2>&1

Default cgroup parent

The --cgroup-parent option allows you to set the default cgroup parent to use for containers. If this option is not set, it defaults to /docker for fs cgroup driver and system.slice for systemd cgroup driver.

If the cgroup has a leading forward slash (/), the cgroup is created under the root cgroup, otherwise the cgroup is created under the daemon cgroup.

Assuming the daemon is running in cgroup daemoncgroup, --cgroup-parent=/foobar creates a cgroup in /sys/fs/cgroup/memory/foobar, whereas using --cgroup-parent=foobar creates the cgroup in /sys/fs/cgroup/memory/daemoncgroup/foobar

The systemd cgroup driver has different rules for --cgroup-parent. Systemd represents hierarchy by slice and the name of the slice encodes the location in the tree. So --cgroup-parent for systemd cgroups should be a slice name. A name can consist of a dash-separated series of names, which describes the path to the slice from the root slice. For example, --cgroup-parent=user-a-b.slice means the memory cgroup for the container is created in /sys/fs/cgroup/memory/user.slice/user-a.slice/user-a-b.slice/docker-<id>.scope.

This setting can also be set per container, using the --cgroup-parent option on docker create and docker run, and takes precedence over the --cgroup-parent option on the daemon.

Daemon configuration file

The --config-file option allows you to set any configuration option for the daemon in a JSON format. This file uses the same flag names as keys, except for flags that allow several entries, where it uses the plural of the flag name, e.g., labels for the label flag. By default, docker tries to load a configuration file from /etc/docker/daemon.json on Linux and %programdata%\docker\config\daemon.json on Windows.

The options set in the configuration file must not conflict with options set via flags. The docker daemon fails to start if an option is duplicated between the file and the flags, regardless their value. We do this to avoid silently ignore changes introduced in configuration reloads. For example, the daemon fails to start if you set daemon labels in the configuration file and also set daemon labels via the --label flag.

Options that are not present in the file are ignored when the daemon starts. This is a full example of the allowed configuration options in the file:

{
	"authorization-plugins": [],
	"dns": [],
	"dns-opts": [],
	"dns-search": [],
	"exec-opts": [],
	"exec-root": "",
	"storage-driver": "",
	"storage-opts": [],
	"labels": [],
	"log-driver": "",
	"log-opts": [],
	"mtu": 0,
	"pidfile": "",
	"graph": "",
	"cluster-store": "",
	"cluster-store-opts": {},
	"cluster-advertise": "",
	"debug": true,
	"hosts": [],
	"log-level": "",
	"tls": true,
	"tlsverify": true,
	"tlscacert": "",
	"tlscert": "",
	"tlskey": "",
	"api-cors-headers": "",
	"selinux-enabled": false,
	"userns-remap": "",
	"group": "",
	"cgroup-parent": "",
	"default-ulimits": {},
	"ipv6": false,
	"iptables": false,
	"ip-forward": false,
	"ip-mask": false,
	"userland-proxy": false,
	"ip": "0.0.0.0",
	"bridge": "",
	"bip": "",
	"fixed-cidr": "",
	"fixed-cidr-v6": "",
	"default-gateway": "",
	"default-gateway-v6": "",
	"icc": false,
	"raw-logs": false,
	"registry-mirrors": [],
	"insecure-registries": [],
	"disable-legacy-registry": false
}

Configuration reloading

Some options can be reconfigured when the daemon is running without requiring to restart the process. We use the SIGHUP signal in Linux to reload, and a global event in Windows with the key Global\docker-daemon-config-$PID. The options can be modified in the configuration file but still will check for conflicts with the provided flags. The daemon fails to reconfigure itself if there are conflicts, but it won’t stop execution.

The list of currently supported options that can be reconfigured is this:

  • debug: it changes the daemon to debug mode when set to true.
  • cluster-store: it reloads the discovery store with the new address.
  • cluster-store-opts: it uses the new options to reload the discovery store.
  • cluster-advertise: it modifies the address advertised after reloading.
  • labels: it replaces the daemon labels with a new set of labels.

Updating and reloading the cluster configurations such as --cluster-store, --cluster-advertise and --cluster-store-opts will take effect only if these configurations were not previously configured. If --cluster-store has been provided in flags and cluster-advertise not, cluster-advertise can be added in the configuration file without accompanied by --cluster-store Configuration reload will log a warning message if it detects a change in previously configured cluster configurations.

Running multiple daemons

Note: Running multiple daemons on a single host is considered as “experimental”. The user should be aware of unsolved problems. This solution may not work properly in some cases. Solutions are currently under development and will be delivered in the near future.

This section describes how to run multiple Docker daemons on a single host. To run multiple daemons, you must configure each daemon so that it does not conflict with other daemons on the same host. You can set these options either by providing them as flags, or by using a daemon configuration file.

The following daemon options must be configured for each daemon:

-b, --bridge=                          Attach containers to a network bridge
--exec-root=/var/run/docker            Root of the Docker execdriver
-g, --graph=/var/lib/docker            Root of the Docker runtime
-p, --pidfile=/var/run/docker.pid      Path to use for daemon PID file
-H, --host=[]                          Daemon socket(s) to connect to
--config-file=/etc/docker/daemon.json  Daemon configuration file
--tlscacert="~/.docker/ca.pem"         Trust certs signed only by this CA
--tlscert="~/.docker/cert.pem"         Path to TLS certificate file
--tlskey="~/.docker/key.pem"           Path to TLS key file

When your daemons use different values for these flags, you can run them on the same host without any problems. It is very important to properly understand the meaning of those options and to use them correctly.

  • The -b, --bridge= flag is set to docker0 as default bridge network. It is created automatically when you install Docker. If you are not using the default, you must create and configure the bridge manually or just set it to ‘none’: --bridge=none
  • --exec-root is the path where the container state is stored. The default value is /var/run/docker. Specify the path for your running daemon here.
  • --graph is the path where images are stored. The default value is /var/lib/docker. To avoid any conflict with other daemons set this parameter separately for each daemon.
  • -p, --pidfile=/var/run/docker.pid is the path where the process ID of the daemon is stored. Specify the path for your pid file here.
  • --host=[] specifies where the Docker daemon will listen for client connections. If unspecified, it defaults to /var/run/docker.sock.
  • --config-file=/etc/docker/daemon.json is the path where configuration file is stored. You can use it instead of daemon flags. Specify the path for each daemon.
  • --tls* Docker daemon supports --tlsverify mode that enforces encrypted and authenticated remote connections. The --tls* options enable use of specific certificates for individual daemons.

Example script for a separate “bootstrap” instance of the Docker daemon without network:

$ docker daemon \
        -H unix:///var/run/docker-bootstrap.sock \
        -p /var/run/docker-bootstrap.pid \
        --iptables=false \
        --ip-masq=false \
        --bridge=none \
        --graph=/var/lib/docker-bootstrap \
        --exec-root=/var/run/docker-bootstrap
doc_docker
doc_docker
2017-02-04 08:22:09
Comments
Leave a Comment

Please login to continue.