Returns a string produced according to the formatting string format
.
The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().
Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:
- An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
- An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
- An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
- An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
- An optional precision specifier in the form of a period (.) followed by an optional decimal digit string that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string. Additionally, the character to use when padding a number may optionally be specified between the period and the digit.
-
A type specifier that says what type the argument data should be treated as. Possible types:
- % - a literal percent character. No argument is required.
- b - the argument is treated as an integer, and presented as a binary number.
- c - the argument is treated as an integer, and presented as the character with that ASCII value.
- d - the argument is treated as an integer, and presented as a (signed) decimal number.
- e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
- E - like %e but uses uppercase letter (e.g. 1.2E+2).
- f - the argument is treated as a float, and presented as a floating-point number (locale aware).
- F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
- g - shorter of %e and %f.
- G - shorter of %E and %f.
- o - the argument is treated as an integer, and presented as an octal number.
- s - the argument is treated as and presented as a string.
- u - the argument is treated as an integer, and presented as an unsigned decimal number.
- x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
- X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).
Variables will be co-erced to a suitable type for the specifier:
Type | Specifiers |
---|---|
string | s |
integer | d, u, c, o, x, X, b |
double | g, G, e, E, f, F |
Attempting to use a combination of the string and width specifiers with character sets that require more than one byte per character may result in unexpected results
The format string supports argument numbering/swapping. Here is an example:
Example #1 Argument swapping
<?php $num = 5; $location = 'tree'; $format = 'There are %d monkeys in the %s'; echo sprintf($format, $num, $location); ?>
Example #2 Argument swapping
<?php $format = 'The %s contains %d monkeys'; echo sprintf($format, $num, $location); ?>
Example #3 Argument swapping
<?php $format = 'The %2$s contains %1$d monkeys'; echo sprintf($format, $num, $location); ?>
Example #4 Argument swapping
<?php $format = 'The %2$s contains %1$d monkeys. That\'s a nice %2$s full of %1$d monkeys.'; echo sprintf($format, $num, $location); ?>
n$ position specifier %
Example #5 Specifying padding character
<?php echo sprintf("%'.9d\n", 123); echo sprintf("%'.09d\n", 123); ?>
The above example will output:
......123 000000123
Example #6 Position specifier with other specifiers
<?php $format = 'The %2$s contains %1$04d monkeys'; echo sprintf($format, $num, $location); ?>
The above example will output:
The tree contains 0005 monkeys
Note:
Attempting to use a position specifier greater than
PHP_INT_MAX
will result in sprintf() generating warnings.
The c type specifier ignores padding and width
The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().
Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:
- An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
- An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
- An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
- An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
- An optional precision specifier in the form of a period (.) followed by an optional decimal digit string that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string. Additionally, the character to use when padding a number may optionally be specified between the period and the digit.
-
A type specifier that says what type the argument data should be treated as. Possible types:
- % - a literal percent character. No argument is required.
- b - the argument is treated as an integer, and presented as a binary number.
- c - the argument is treated as an integer, and presented as the character with that ASCII value.
- d - the argument is treated as an integer, and presented as a (signed) decimal number.
- e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
- E - like %e but uses uppercase letter (e.g. 1.2E+2).
- f - the argument is treated as a float, and presented as a floating-point number (locale aware).
- F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
- g - shorter of %e and %f.
- G - shorter of %E and %f.
- o - the argument is treated as an integer, and presented as an octal number.
- s - the argument is treated as and presented as a string.
- u - the argument is treated as an integer, and presented as an unsigned decimal number.
- x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
- X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).
Variables will be co-erced to a suitable type for the specifier:
Type | Specifiers |
---|---|
string | s |
integer | d, u, c, o, x, X, b |
double | g, G, e, E, f, F |
Attempting to use a combination of the string and width specifiers with character sets that require more than one byte per character may result in unexpected results
The format string supports argument numbering/swapping. Here is an example:
Example #1 Argument swapping
<?php $num = 5; $location = 'tree'; $format = 'There are %d monkeys in the %s'; echo sprintf($format, $num, $location); ?>
Example #2 Argument swapping
<?php $format = 'The %s contains %d monkeys'; echo sprintf($format, $num, $location); ?>
Example #3 Argument swapping
<?php $format = 'The %2$s contains %1$d monkeys'; echo sprintf($format, $num, $location); ?>
Example #4 Argument swapping
<?php $format = 'The %2$s contains %1$d monkeys. That\'s a nice %2$s full of %1$d monkeys.'; echo sprintf($format, $num, $location); ?>
n$ position specifier %
Example #5 Specifying padding character
<?php echo sprintf("%'.9d\n", 123); echo sprintf("%'.09d\n", 123); ?>
The above example will output:
......123 000000123
Example #6 Position specifier with other specifiers
<?php $format = 'The %2$s contains %1$04d monkeys'; echo sprintf($format, $num, $location); ?>
The above example will output:
The tree contains 0005 monkeys
Note:
Attempting to use a position specifier greater than
PHP_INT_MAX
will result in sprintf() generating warnings.
The c type specifier ignores padding and width
The format string is composed of zero or more directives: ordinary characters (excluding %) that are copied directly to the result, and conversion specifications, each of which results in fetching its own parameter. This applies to both sprintf() and printf().
Each conversion specification consists of a percent sign (%), followed by one or more of these elements, in order:
- An optional sign specifier that forces a sign (- or +) to be used on a number. By default, only the - sign is used on a number if it's negative. This specifier forces positive numbers to have the + sign attached as well, and was added in PHP 4.3.0.
- An optional padding specifier that says what character will be used for padding the results to the right string size. This may be a space character or a 0 (zero character). The default is to pad with spaces. An alternate padding character can be specified by prefixing it with a single quote ('). See the examples below.
- An optional alignment specifier that says if the result should be left-justified or right-justified. The default is right-justified; a - character here will make it left-justified.
- An optional number, a width specifier that says how many characters (minimum) this conversion should result in.
- An optional precision specifier in the form of a period (.) followed by an optional decimal digit string that says how many decimal digits should be displayed for floating-point numbers. When using this specifier on a string, it acts as a cutoff point, setting a maximum character limit to the string. Additionally, the character to use when padding a number may optionally be specified between the period and the digit.
-
A type specifier that says what type the argument data should be treated as. Possible types:
- % - a literal percent character. No argument is required.
- b - the argument is treated as an integer, and presented as a binary number.
- c - the argument is treated as an integer, and presented as the character with that ASCII value.
- d - the argument is treated as an integer, and presented as a (signed) decimal number.
- e - the argument is treated as scientific notation (e.g. 1.2e+2). The precision specifier stands for the number of digits after the decimal point since PHP 5.2.1. In earlier versions, it was taken as number of significant digits (one less).
- E - like %e but uses uppercase letter (e.g. 1.2E+2).
- f - the argument is treated as a float, and presented as a floating-point number (locale aware).
- F - the argument is treated as a float, and presented as a floating-point number (non-locale aware). Available since PHP 4.3.10 and PHP 5.0.3.
- g - shorter of %e and %f.
- G - shorter of %E and %f.
- o - the argument is treated as an integer, and presented as an octal number.
- s - the argument is treated as and presented as a string.
- u - the argument is treated as an integer, and presented as an unsigned decimal number.
- x - the argument is treated as an integer and presented as a hexadecimal number (with lowercase letters).
- X - the argument is treated as an integer and presented as a hexadecimal number (with uppercase letters).
Variables will be co-erced to a suitable type for the specifier:
Type | Specifiers |
---|---|
string | s |
integer | d, u, c, o, x, X, b |
double | g, G, e, E, f, F |
Attempting to use a combination of the string and width specifiers with character sets that require more than one byte per character may result in unexpected results
The format string supports argument numbering/swapping. Here is an example:
Example #1 Argument swapping
<?php $num = 5; $location = 'tree'; $format = 'There are %d monkeys in the %s'; echo sprintf($format, $num, $location); ?>
Example #2 Argument swapping
<?php $format = 'The %s contains %d monkeys'; echo sprintf($format, $num, $location); ?>
Example #3 Argument swapping
<?php $format = 'The %2$s contains %1$d monkeys'; echo sprintf($format, $num, $location); ?>
Example #4 Argument swapping
<?php $format = 'The %2$s contains %1$d monkeys. That\'s a nice %2$s full of %1$d monkeys.'; echo sprintf($format, $num, $location); ?>
n$ position specifier %
Example #5 Specifying padding character
<?php echo sprintf("%'.9d\n", 123); echo sprintf("%'.09d\n", 123); ?>
The above example will output:
......123 000000123
Example #6 Position specifier with other specifiers
<?php $format = 'The %2$s contains %1$04d monkeys'; echo sprintf($format, $num, $location); ?>
The above example will output:
The tree contains 0005 monkeys
Note:
Attempting to use a position specifier greater than
PHP_INT_MAX
will result in sprintf() generating warnings.
The c type specifier ignores padding and width
Returns a string produced according to the formatting string format
.
<?php $num = 5; $location = 'tree'; $format = 'There are %d monkeys in the %s'; echo sprintf($format, $num, $location); ?>
<?php $format = 'The %s contains %d monkeys'; echo sprintf($format, $num, $location); ?>
<?php $format = 'The %2$s contains %1$d monkeys'; echo sprintf($format, $num, $location); ?>
<?php $format = 'The %2$s contains %1$d monkeys. That\'s a nice %2$s full of %1$d monkeys.'; echo sprintf($format, $num, $location); ?>
<?php echo sprintf("%'.9d\n", 123); echo sprintf("%'.09d\n", 123); ?>
The above example will output:
......123 000000123
<?php $format = 'The %2$s contains %1$04d monkeys'; echo sprintf($format, $num, $location); ?>
The above example will output:
The tree contains 0005 monkeys
<?php $n = 43951789; $u = -43951789; $c = 65; // ASCII 65 is 'A' // notice the double %%, this prints a literal '%' character printf("%%b = '%b'\n", $n); // binary representation printf("%%c = '%c'\n", $c); // print the ascii character, same as chr() function printf("%%d = '%d'\n", $n); // standard integer representation printf("%%e = '%e'\n", $n); // scientific notation printf("%%u = '%u'\n", $n); // unsigned integer representation of a positive integer printf("%%u = '%u'\n", $u); // unsigned integer representation of a negative integer printf("%%f = '%f'\n", $n); // floating point representation printf("%%o = '%o'\n", $n); // octal representation printf("%%s = '%s'\n", $n); // string representation printf("%%x = '%x'\n", $n); // hexadecimal representation (lower-case) printf("%%X = '%X'\n", $n); // hexadecimal representation (upper-case) printf("%%+d = '%+d'\n", $n); // sign specifier on a positive integer printf("%%+d = '%+d'\n", $u); // sign specifier on a negative integer ?>
The above example will output:
%b = '10100111101010011010101101' %c = 'A' %d = '43951789' %e = '4.39518e+7' %u = '43951789' %u = '4251015507' %f = '43951789.000000' %o = '247523255' %s = '43951789' %x = '29ea6ad' %X = '29EA6AD' %+d = '+43951789' %+d = '-43951789'
<?php $s = 'monkey'; $t = 'many monkeys'; printf("[%s]\n", $s); // standard string output printf("[%10s]\n", $s); // right-justification with spaces printf("[%-10s]\n", $s); // left-justification with spaces printf("[%010s]\n", $s); // zero-padding works on strings too printf("[%'#10s]\n", $s); // use the custom padding character '#' printf("[%10.10s]\n", $t); // left-justification but with a cutoff of 10 characters ?>
The above example will output:
[monkey] [ monkey] [monkey ] [0000monkey] [####monkey] [many monke]
<?php $isodate = sprintf("%04d-%02d-%02d", $year, $month, $day); ?>
<?php $money1 = 68.75; $money2 = 54.35; $money = $money1 + $money2; // echo $money will output "123.1"; $formatted = sprintf("%01.2f", $money); // echo $formatted will output "123.10" ?>
<?php $number = 362525200; echo sprintf("%.3e", $number); // outputs 3.625e+8 ?>
printf() -
sscanf() -
fscanf() -
Please login to continue.