mlab

matplotlib.mlab

Numerical python functions written for compatability with MATLAB commands with the same names.

MATLAB compatible functions

cohere(): Coherence (normalized cross spectral density)
csd(): Cross spectral density uing Welch?s average periodogram
detrend(): Remove the mean or best fit line from an array
find(): Return the indices where some condition is true; numpy.nonzero is similar but more general.
griddata(): Interpolate irregularly distributed data to a regular grid.
prctile(): Find the percentiles of a sequence
prepca(): Principal Component Analysis
psd(): Power spectral density uing Welch?s average periodogram
rk4(): A 4th order runge kutta integrator for 1D or ND systems
specgram(): Spectrogram (spectrum over segments of time)

Miscellaneous functions

Functions that don?t exist in MATLAB, but are useful anyway:

cohere_pairs(): Coherence over all pairs. This is not a MATLAB function, but we compute coherence a lot in my lab, and we compute it for a lot of pairs. This function is optimized to do this efficiently by caching the direct FFTs.
rk4(): A 4th order Runge-Kutta ODE integrator in case you ever find yourself stranded without scipy (and the far superior scipy.integrate tools)
contiguous_regions(): Return the indices of the regions spanned by some logical mask
cross_from_below(): Return the indices where a 1D array crosses a threshold from below
cross_from_above(): Return the indices where a 1D array crosses a threshold from above
complex_spectrum(): Return the complex-valued frequency spectrum of a signal
magnitude_spectrum(): Return the magnitude of the frequency spectrum of a signal
angle_spectrum(): Return the angle (wrapped phase) of the frequency spectrum of a signal
phase_spectrum(): Return the phase (unwrapped angle) of the frequency spectrum of a signal
detrend_mean(): Remove the mean from a line.
demean(): Remove the mean from a line. This function is the same as as detrend_mean() except for the default axis.
detrend_linear(): Remove the best fit line from a line.
detrend_none(): Return the original line.
stride_windows(): Get all windows in an array in a memory-efficient manner
stride_repeat(): Repeat an array in a memory-efficient manner
apply_window(): Apply a window along a given axis

record array helper functions

A collection of helper methods for numpyrecord arrays

See misc Examples

rec2txt(): Pretty print a record array
rec2csv(): Store record array in CSV file
csv2rec(): Import record array from CSV file with type inspection
rec_append_fields(): Adds field(s)/array(s) to record array
rec_drop_fields(): Drop fields from record array
rec_join(): Join two record arrays on sequence of fields
recs_join(): A simple join of multiple recarrays using a single column as a key
rec_groupby(): Summarize data by groups (similar to SQL GROUP BY)
rec_summarize(): Helper code to filter rec array fields into new fields

For the rec viewer functions(e rec2csv), there are a bunch of Format objects you can pass into the functions that will do things like color negative values red, set percent formatting and scaling, etc.

Example usage:

r = csv2rec('somefile.csv', checkrows=0)

formatd = dict(
    weight = FormatFloat(2),
    change = FormatPercent(2),
    cost   = FormatThousands(2),
    )


rec2excel(r, 'test.xls', formatd=formatd)
rec2csv(r, 'test.csv', formatd=formatd)
scroll = rec2gtk(r, formatd=formatd)

win = gtk.Window()
win.set_size_request(600,800)
win.add(scroll)
win.show_all()
gtk.main()

class matplotlib.mlab.FormatBool

Bases: matplotlib.mlab.FormatObj

fromstr(s)

toval(x)

class matplotlib.mlab.FormatDate(fmt)

Bases: matplotlib.mlab.FormatObj

fromstr(x)

toval(x)

class matplotlib.mlab.FormatDatetime(fmt='%Y-%m-%d %H:%M:%S')

Bases: matplotlib.mlab.FormatDate

fromstr(x)

class matplotlib.mlab.FormatFloat(precision=4, scale=1.0)

Bases: matplotlib.mlab.FormatFormatStr

fromstr(s)

toval(x)

class matplotlib.mlab.FormatFormatStr(fmt)

Bases: matplotlib.mlab.FormatObj

tostr(x)

class matplotlib.mlab.FormatInt

Bases: matplotlib.mlab.FormatObj

fromstr(s)

tostr(x)

toval(x)

class matplotlib.mlab.FormatMillions(precision=4): Bases: matplotlib.mlab.FormatFloat

class matplotlib.mlab.FormatObj

Bases: object

fromstr(s)

tostr(x)

toval(x)

class matplotlib.mlab.FormatPercent(precision=4): Bases: matplotlib.mlab.FormatFloat

class matplotlib.mlab.FormatString

Bases: matplotlib.mlab.FormatObj

tostr(x)

class matplotlib.mlab.FormatThousands(precision=4): Bases: matplotlib.mlab.FormatFloat

class matplotlib.mlab.GaussianKDE(dataset, bw_method=None)

Bases: object

Representation of a kernel-density estimate using Gaussian kernels.

Call signature:: kde = GaussianKDE(dataset, bw_method=?silverman?)

Parameters:

Parameters:	dataset : array_like Datapoints to estimate from. In case of univariate data this is a 1-D array, otherwise a 2-D array with shape (# of dims, # of data). bw_method : str, scalar or callable, optional The method used to calculate the estimator bandwidth. This can be ?scott?, ?silverman?, a scalar constant or a callable. If a scalar, this will be used directly as `kde.factor`. If a callable, it should take a `GaussianKDE` instance as only parameter and return a scalar. If None (default), ?scott? is used.

dataset : array_like

Datapoints to estimate from. In case of univariate data this is a 1-D array, otherwise a 2-D array with shape (# of dims, # of data).

bw_method : str, scalar or callable, optional

The method used to calculate the estimator bandwidth. This can be ?scott?, ?silverman?, a scalar constant or a callable. If a scalar, this will be used directly as kde.factor. If a callable, it should take a GaussianKDE instance as only parameter and return a scalar. If None (default), ?scott? is used.

Attributes

dataset	(ndarray) The dataset with which `gaussian_kde` was initialized.
dim	(int) Number of dimensions.
num_dp	(int) Number of datapoints.
factor	(float) The bandwidth factor, obtained from `kde.covariance_factor`, with which the covariance matrix is multiplied.
covariance	(ndarray) The covariance matrix of `dataset`, scaled by the calculated bandwidth (`kde.factor`).
inv_cov	(ndarray) The inverse of `covariance`.

Methods

kde.evaluate(points)	(ndarray) Evaluate the estimated pdf on a provided set of points.
kde(points)	(ndarray) Same as kde.evaluate(points)

covariance_factor()

evaluate(points)

Evaluate the estimated pdf on a set of points.

Parameters:

Parameters:	points : (# of dimensions, # of points)-array Alternatively, a (# of dimensions,) vector can be passed in and treated as a single point.
Returns:	values : (# of points,)-array The values at each point.
Raises:	ValueError : if the dimensionality of the input points is different than the dimensionality of the KDE.

points : (# of dimensions, # of points)-array

Alternatively, a (# of dimensions,) vector can be passed in and treated as a single point.

Returns:

values : (# of points,)-array

The values at each point.

Raises:

ValueError : if the dimensionality of the input points is different

than the dimensionality of the KDE.

scotts_factor()

silverman_factor()

class matplotlib.mlab.PCA(a, standardize=True)

Bases: object

compute the SVD of a and store data for PCA. Use project to project the data onto a reduced set of dimensions

Inputs:

a: a numobservations x numdims array standardize: True if input data are to be standardized. If False, only centering will be carried out.

Attrs:

a a centered unit sigma version of input a

numrows, numcols: the dimensions of a

mu: a numdims array of means of a. This is the vector that points to the origin of PCA space.

sigma: a numdims array of standard deviation of a

fracs: the proportion of variance of each of the principal components

s: the actual eigenvalues of the decomposition

Wt: the weight vector for projecting a numdims point or array into PCA space

Y: a projected into PCA space

The factor loadings are in the Wt factor, i.e., the factor loadings for the 1st principal component are given by Wt[0]. This row is also the 1st eigenvector.

center(x): center and optionally standardize the data using the mean and sigma from training set a

project(x, minfrac=0.0): project x onto the principle axes, dropping any axes where fraction of variance<minfrac

matplotlib.mlab.amap(function, sequence[, sequence, ...]) ? array.: Works like map(), but it returns an array. This is just a convenient shorthand for numpy.array(map(...)).

matplotlib.mlab.angle_spectrum(x, Fs=None, window=None, pad_to=None, sides=None)

Compute the angle of the frequency spectrum (wrapped phase spectrum) of x. Data is padded to a length of pad_to and the windowing function window is applied to the signal.

x: 1-D array or sequence: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer: The number of points to which the data segment is padded when performing the FFT. While not increasing the actual resolution of the spectrum (the minimum distance between resolvable peaks), this can give more points in the plot, allowing for more detail. This corresponds to the n parameter in the call to fft(). The default is None, which sets pad_to equal to the length of the input signal (i.e. no padding).

Returns the tuple (spectrum, freqs):

spectrum: 1-D array: The values for the angle spectrum in radians (real valued)
freqs: 1-D array: The frequencies corresponding to the elements in spectrum

See also

complex_spectrum(): This function returns the angle value of complex_spectrum().
magnitude_spectrum(): angle_spectrum() returns the magnitudes of the corresponding frequencies.
phase_spectrum(): phase_spectrum() returns the unwrapped version of this function.
specgram(): specgram() can return the angle spectrum of segments within the signal.

matplotlib.mlab.apply_window(x, window, axis=0, return_window=None)

Apply the given window to the given 1D or 2D array along the given axis.

Call signature:

  apply_window(x, window, axis=0, return_window=False)

*x*: 1D or 2D array or sequence
  Array or sequence containing the data.

*winodw*: function or array.
  Either a function to generate a window or an array with length
  *x*.shape[*axis*]

*axis*: integer
  The axis over which to do the repetition.
  Must be 0 or 1.  The default is 0

*return_window*: bool
  If true, also return the 1D values of the window that was applied

matplotlib.mlab.base_repr(number, base=2, padding=0): Return the representation of a number in any given base.

matplotlib.mlab.binary_repr(number, max_length=1025)

Return the binary representation of the input number as a string.

This is more efficient than using base_repr() with base 2.

Increase the value of max_length for very large numbers. Note that on 32-bit machines, 2**1023 is the largest integer power of 2 which can be converted to a Python float.

matplotlib.mlab.bivariate_normal(X, Y, sigmax=1.0, sigmay=1.0, mux=0.0, muy=0.0, sigmaxy=0.0)

Bivariate Gaussian distribution for equal shape X, Y.

See bivariate normal at mathworld.

matplotlib.mlab.center_matrix(M, dim=0)

Return the matrix M with each row having zero mean and unit std.

If dim = 1 operate on columns instead of rows. (dim is opposite to the numpy axis kwarg.)

matplotlib.mlab.cohere(x, y, NFFT=256, Fs=2, detrend=, window=, noverlap=0, pad_to=None, sides='default', scale_by_freq=None)

The coherence between x and y. Coherence is the normalized cross spectral density:

x, y: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer

The number of points to which the data segment is padded when performing the FFT. This can be different from NFFT, which specifies the number of data points used. While not increasing the actual resolution of the spectrum (the minimum distance between resolvable peaks), this can give more points in the plot, allowing for more detail. This corresponds to the n parameter in the call to fft(). The default is None, which sets pad_to equal to NFFT

NFFT: integer

The number of data points used in each block for the FFT. A power 2 is most efficient. The default value is 256. This should NOT be used to get zero padding, or the scaling of the result will be incorrect. Use pad_to for this instead.

detrend: [ ?default? | ?constant? | ?mean? | ?linear? | ?none?] or

callable

The function applied to each segment before fft-ing, designed to remove the mean or linear trend. Unlike in MATLAB, where the detrend parameter is a vector, in matplotlib is it a function. The pylab module defines detrend_none(), detrend_mean(), and detrend_linear(), but you can use a custom function as well. You can also use a string to choose one of the functions. ?default?, ?constant?, and ?mean? call detrend_mean(). ?linear? calls detrend_linear(). ?none? calls detrend_none().

scale_by_freq: boolean

Specifies whether the resulting density values should be scaled by the scaling frequency, which gives density in units of Hz^-1. This allows for integration over the returned frequency values. The default is True for MATLAB compatibility.

noverlap: integer: The number of points of overlap between blocks. The default value is 0 (no overlap).

The return value is the tuple (Cxy, f), where f are the frequencies of the coherence vector. For cohere, scaling the individual densities by the sampling frequency has no effect, since the factors cancel out.

See also

psd() and csd(): For information about the methods used to compute , and .

matplotlib.mlab.cohere_pairs(X, ij, NFFT=256, Fs=2, detrend=, window=, noverlap=0, preferSpeedOverMemory=True, progressCallback=, returnPxx=False)

Call signature:

Cxy, Phase, freqs = cohere_pairs( X, ij, ...)

Compute the coherence and phase for all pairs ij, in X.

X is a numSamples * numCols array

ij is a list of tuples. Each tuple is a pair of indexes into the columns of X for which you want to compute coherence. For example, if X has 64 columns, and you want to compute all nonredundant pairs, define ij as:

ij = []
for i in range(64):
    for j in range(i+1,64):
        ij.append( (i,j) )

preferSpeedOverMemory is an optional bool. Defaults to true. If False, limits the caching by only making one, rather than two, complex cache arrays. This is useful if memory becomes critical. Even when preferSpeedOverMemory is False, cohere_pairs() will still give significant performace gains over calling cohere() for each pair, and will use subtantially less memory than if preferSpeedOverMemory is True. In my tests with a 43000,64 array over all nonredundant pairs, preferSpeedOverMemory = True delivered a 33% performance boost on a 1.7GHZ Athlon with 512MB RAM compared with preferSpeedOverMemory = False. But both solutions were more than 10x faster than naively crunching all possible pairs through cohere().

Returns:

(Cxy, Phase, freqs)

where:

Cxy: dictionary of (i, j) tuples -> coherence vector for that pair. i.e., Cxy[(i,j) = cohere(X[:,i], X[:,j]). Number of dictionary keys is len(ij).
Phase: dictionary of phases of the cross spectral density at each frequency for each pair. Keys are (i, j).
freqs: vector of frequencies, equal in length to either the

coherence or phase vectors for any (i, j) key.

e.g., to make a coherence Bode plot:

subplot(211)
plot( freqs, Cxy[(12,19)])
subplot(212)
plot( freqs, Phase[(12,19)])

For a large number of pairs, cohere_pairs() can be much more efficient than just calling cohere() for each pair, because it caches most of the intensive computations. If is the number of pairs, this function is for most of the heavy lifting, whereas calling cohere for each pair is . However, because of the caching, it is also more memory intensive, making 2 additional complex arrays with approximately the same number of elements as X.

See test/cohere_pairs_test.py in the src tree for an example script that shows that this cohere_pairs() and cohere() give the same results for a given pair.

See also

psd(): For information about the methods used to compute , and .

matplotlib.mlab.complex_spectrum(x, Fs=None, window=None, pad_to=None, sides=None)

Compute the complex-valued frequency spectrum of x. Data is padded to a length of pad_to and the windowing function window is applied to the signal.

x: 1-D array or sequence: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer: The number of points to which the data segment is padded when performing the FFT. While not increasing the actual resolution of the spectrum (the minimum distance between resolvable peaks), this can give more points in the plot, allowing for more detail. This corresponds to the n parameter in the call to fft(). The default is None, which sets pad_to equal to the length of the input signal (i.e. no padding).

Returns the tuple (spectrum, freqs):

spectrum: 1-D array: The values for the complex spectrum (complex valued)
freqs: 1-D array: The frequencies corresponding to the elements in spectrum

See also

magnitude_spectrum(): magnitude_spectrum() returns the absolute value of this function.
angle_spectrum(): angle_spectrum() returns the angle of this function.
phase_spectrum(): phase_spectrum() returns the phase (unwrapped angle) of this function.
specgram(): specgram() can return the complex spectrum of segments within the signal.

matplotlib.mlab.contiguous_regions(mask): return a list of (ind0, ind1) such that mask[ind0:ind1].all() is True and we cover all such regions

matplotlib.mlab.cross_from_above(x, threshold)

return the indices into x where x crosses some threshold from below, e.g., the i?s where:

x[i-1]>threshold and x[i]<=threshold

matplotlib.mlab.cross_from_below(x, threshold)

return the indices into x where x crosses some threshold from below, e.g., the i?s where:

x[i-1]<threshold and x[i]>=threshold

Example code:

import matplotlib.pyplot as plt

t = np.arange(0.0, 2.0, 0.1)
s = np.sin(2*np.pi*t)

fig = plt.figure()
ax = fig.add_subplot(111)
ax.plot(t, s, '-o')
ax.axhline(0.5)
ax.axhline(-0.5)

ind = cross_from_below(s, 0.5)
ax.vlines(t[ind], -1, 1)

ind = cross_from_above(s, -0.5)
ax.vlines(t[ind], -1, 1)

plt.show()

matplotlib.mlab.csd(x, y, NFFT=None, Fs=None, detrend=None, window=None, noverlap=None, pad_to=None, sides=None, scale_by_freq=None)

Compute the cross-spectral density.

Call signature:

csd(x, y, NFFT=256, Fs=2, detrend=mlab.detrend_none,
    window=mlab.window_hanning, noverlap=0, pad_to=None,
    sides='default', scale_by_freq=None)

The cross spectral density by Welch?s average periodogram method. The vectors x and y are divided into NFFT length segments. Each segment is detrended by function detrend and windowed by function window. noverlap gives the length of the overlap between segments. The product of the direct FFTs of x and y are averaged over each segment to compute , with a scaling to correct for power loss due to windowing.

If len(x) < NFFT or len(y) < NFFT, they will be zero padded to NFFT.

x, y: 1-D arrays or sequences: Arrays or sequences containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer

NFFT: integer

detrend: [ ?default? | ?constant? | ?mean? | ?linear? | ?none?] or

callable

scale_by_freq: boolean

noverlap: integer: The number of points of overlap between segments. The default value is 0 (no overlap).

Returns the tuple (Pxy, freqs):

Pxy: 1-D array: The values for the cross spectrum P_{xy} before scaling (real valued)
freqs: 1-D array: The frequencies corresponding to the elements in Pxy

Refs:: Bendat & Piersol ? Random Data: Analysis and Measurement Procedures, John Wiley & Sons (1986)

See also

psd(): psd() is the equivalent to setting y=x.

matplotlib.mlab.csv2rec(fname, comments='#', skiprows=0, checkrows=0, delimiter=', ', converterd=None, names=None, missing='', missingd=None, use_mrecords=False, dayfirst=False, yearfirst=False)

Load data from comma/space/tab delimited file in fname into a numpy record array and return the record array.

If names is None, a header row is required to automatically assign the recarray names. The headers will be lower cased, spaces will be converted to underscores, and illegal attribute name characters removed. If names is not None, it is a sequence of names to use for the column names. In this case, it is assumed there is no header row.

fname: can be a filename or a file handle. Support for gzipped files is automatic, if the filename ends in ?.gz?
comments: the character used to indicate the start of a comment in the file, or None to switch off the removal of comments
skiprows: is the number of rows from the top to skip
checkrows: is the number of rows to check to validate the column data type. When set to zero all rows are validated.
converterd: if not None, is a dictionary mapping column number or munged column name to a converter function.
names: if not None, is a list of header names. In this case, no header will be read from the file
missingd is a dictionary mapping munged column names to field values which signify that the field does not contain actual data and should be masked, e.g., ?0000-00-00? or ?unused?
missing: a string whose value signals a missing field regardless of the column it appears in
use_mrecords: if True, return an mrecords.fromrecords record array if any of the data are missing
dayfirst: default is False so that MM-DD-YY has precedence over DD-MM-YY. See http://labix.org/python-dateutil#head-b95ce2094d189a89f80f5ae52a05b4ab7b41af47 for further information.
yearfirst: default is False so that MM-DD-YY has precedence over YY-MM-DD. See http://labix.org/python-dateutil#head-b95ce2094d189a89f80f5ae52a05b4ab7b41af47 for further information.

If no rows are found, None is returned ? see examples/loadrec.py

matplotlib.mlab.csvformat_factory(format)

matplotlib.mlab.demean(x, axis=0)

Return x minus its mean along the specified axis.

Call signature:

  demean(x, axis=0)

*x*: array or sequence
  Array or sequence containing the data
  Can have any dimensionality

*axis*: integer
  The axis along which to take the mean.  See numpy.mean for a
  description of this argument.

See also

delinear()

denone(): delinear() and denone() are other detrend algorithms.
detrend_mean(): This function is the same as as detrend_mean() except for the default axis.

matplotlib.mlab.detrend(x, key=None, axis=None)

Return x with its trend removed.

Call signature:

  detrend(x, key='mean')

*x*: array or sequence
  Array or sequence containing the data.

*key*: [ 'default' | 'constant' | 'mean' | 'linear' | 'none'] or function
    Specifies the detrend algorithm to use.  'default' is 'mean',
    which is the same as :func:`detrend_mean`.  'constant' is the same.
    'linear' is the same as :func:`detrend_linear`.  'none' is the same
    as :func:`detrend_none`.  The default is 'mean'.  See the
    corresponding functions for more details regarding the algorithms.
    Can also be a function that carries out the detrend operation.

*axis*: integer
  The axis along which to do the detrending.

See also

detrend_mean(): detrend_mean() implements the ?mean? algorithm.
detrend_linear(): detrend_linear() implements the ?linear? algorithm.
detrend_none(): detrend_none() implements the ?none? algorithm.

matplotlib.mlab.detrend_linear(y)

Return x minus best fit line; ?linear? detrending.

Call signature:

  detrend_linear(y)

*y*: 0-D or 1-D array or sequence
  Array or sequence containing the data

*axis*: integer
  The axis along which to take the mean.  See numpy.mean for a
  description of this argument.

See also

delinear(): This function is the same as as delinear() except for the default axis.

detrend_mean()

detrend_none(): detrend_mean() and detrend_none() are other detrend algorithms.
detrend(): detrend() is a wrapper around all the detrend algorithms.

matplotlib.mlab.detrend_mean(x, axis=None)

Return x minus the mean(x).

Call signature:

  detrend_mean(x, axis=None)

*x*: array or sequence
  Array or sequence containing the data
  Can have any dimensionality

*axis*: integer
  The axis along which to take the mean.  See numpy.mean for a
  description of this argument.

See also

demean(): This function is the same as as demean() except for the default axis.

detrend_linear()

detrend_none(): detrend_linear() and detrend_none() are other detrend algorithms.
detrend(): detrend() is a wrapper around all the detrend algorithms.

matplotlib.mlab.detrend_none(x, axis=None)

Return x: no detrending.

Call signature:

  detrend_none(x, axis=None)

*x*: any object
  An object containing the data

*axis*: integer
  This parameter is ignored.
  It is included for compatibility with detrend_mean

See also

denone(): This function is the same as as denone() except for the default axis, which has no effect.

detrend_mean()

detrend_linear(): detrend_mean() and detrend_linear() are other detrend algorithms.
detrend(): detrend() is a wrapper around all the detrend algorithms.

matplotlib.mlab.dist(x, y): Return the distance between two points.

matplotlib.mlab.dist_point_to_segment(p, s0, s1)

Get the distance of a point to a segment.

p, s0, s1 are xy sequences

This algorithm from http://softsurfer.com/Archive/algorithm_0102/algorithm_0102.htm#Distance%20to%20Ray%20or%20Segment

matplotlib.mlab.distances_along_curve(X)

Computes the distance between a set of successive points in N dimensions.

Where X is an M x N array or matrix. The distances between successive rows is computed. Distance is the standard Euclidean distance.

matplotlib.mlab.donothing_callback(*args)

matplotlib.mlab.entropy(y, bins)

Return the entropy of the data in y in units of nat.

where is the probability of observing y in the bin of bins. bins can be a number of bins or a range of bins; see numpy.histogram().

Compare S with analytic calculation for a Gaussian:

x = mu + sigma * randn(200000)
Sanalytic = 0.5 * ( 1.0 + log(2*pi*sigma**2.0) )

matplotlib.mlab.exp_safe(x)

Compute exponentials which safely underflow to zero.

Slow, but convenient to use. Note that numpy provides proper floating point exception handling with access to the underlying hardware.

matplotlib.mlab.fftsurr(x, detrend=, window=): Compute an FFT phase randomized surrogate of x.

matplotlib.mlab.find(condition): Return the indices where ravel(condition) is true

matplotlib.mlab.frange([start, ]stop[, step, keywords]) ? array of floats

Return a numpy ndarray containing a progression of floats. Similar to numpy.arange(), but defaults to a closed interval.

frange(x0, x1) returns [x0, x0+1, x0+2, ..., x1]; start defaults to 0, and the endpoint is included. This behavior is different from that of range() and numpy.arange(). This is deliberate, since frange() will probably be more useful for generating lists of points for function evaluation, and endpoints are often desired in this use. The usual behavior of range() can be obtained by setting the keyword closed = 0, in this case, frange() basically becomes :func:numpy.arange`.

When step is given, it specifies the increment (or decrement). All arguments can be floating point numbers.

frange(x0,x1,d) returns [x0,x0+d,x0+2d,...,xfin] where xfin <= x1.

frange() can also be called with the keyword npts. This sets the number of points the list should contain (and overrides the value step might have been given). numpy.arange() doesn?t offer this option.

Examples:

>>> frange(3)
array([ 0.,  1.,  2.,  3.])
>>> frange(3,closed=0)
array([ 0.,  1.,  2.])
>>> frange(1,6,2)
array([1, 3, 5])   or 1,3,5,7, depending on floating point vagueries
>>> frange(1,6.5,npts=5)
array([ 1.   ,  2.375,  3.75 ,  5.125,  6.5  ])

matplotlib.mlab.get_formatd(r, formatd=None): build a formatd guaranteed to have a key for every dtype name

matplotlib.mlab.get_sparse_matrix(M, N, frac=0.1): Return a M x N sparse matrix with frac elements randomly filled.

matplotlib.mlab.get_xyz_where(Z, Cond): Z and Cond are M x N matrices. Z are data and Cond is a boolean matrix where some condition is satisfied. Return value is (x, y, z) where x and y are the indices into Z and z are the values of Z at those indices. x, y, and z are 1D arrays.

matplotlib.mlab.griddata(x, y, z, xi, yi, interp='nn')

Interpolates from a nonuniformly spaced grid to some other grid.

Fits a surface of the form z = f(x, y) to the data in the (usually) nonuniformly spaced vectors (x, y, z), then interpolates this surface at the points specified by (xi, yi) to produce zi.

Parameters:

Parameters:	x, y, z : 1d array_like Coordinates of grid points to interpolate from. xi, yi : 1d or 2d array_like Coordinates of grid points to interpolate to. interp : string key from {?nn?, ?linear?} Interpolation algorithm, either ?nn? for natural neighbor, or ?linear? for linear interpolation.
Returns:	2d float array Array of values interpolated at (`xi`, `yi`) points. Array will be masked is any of (`xi`, `yi`) are outside the convex hull of (`x`, `y`).

x, y, z : 1d array_like

Coordinates of grid points to interpolate from.

xi, yi : 1d or 2d array_like

Coordinates of grid points to interpolate to.

interp : string key from {?nn?, ?linear?}

Interpolation algorithm, either ?nn? for natural neighbor, or ?linear? for linear interpolation.

Returns:

2d float array

Array of values interpolated at (xi, yi) points. Array will be masked is any of (xi, yi) are outside the convex hull of (x, y).

Notes

If interp is ?nn? (the default), uses natural neighbor interpolation based on Delaunay triangulation. This option is only available if the mpl_toolkits.natgrid module is installed. This can be downloaded from https://github.com/matplotlib/natgrid. The (xi, yi) grid must be regular and monotonically increasing in this case.

If interp is ?linear?, linear interpolation is used via matplotlib.tri.LinearTriInterpolator.

Instead of using griddata, more flexible functionality and other interpolation options are available using a matplotlib.tri.Triangulation and a matplotlib.tri.TriInterpolator.

matplotlib.mlab.identity(n, rank=2, dtype='l', typecode=None)

Returns the identity matrix of shape (n, n, ..., n) (rank r).

For ranks higher than 2, this object is simply a multi-index Kronecker delta:

                    /  1  if i0=i1=...=iR,
id[i0,i1,...,iR] = -|
                    \  0  otherwise.

Optionally a dtype (or typecode) may be given (it defaults to ?l?).

Since rank defaults to 2, this function behaves in the default case (when only n is given) like numpy.identity(n) ? but surprisingly, it is much faster.

matplotlib.mlab.inside_poly(points, verts)

points is a sequence of x, y points. verts is a sequence of x, y vertices of a polygon.

Return value is a sequence of indices into points for the points that are inside the polygon.

matplotlib.mlab.is_closed_polygon(X): Tests whether first and last object in a sequence are the same. These are presumably coordinates on a polygonal curve, in which case this function tests if that curve is closed.

matplotlib.mlab.ispower2(n)

Returns the log base 2 of n if n is a power of 2, zero otherwise.

Note the potential ambiguity if n == 1: 2**0 == 1, interpret accordingly.

matplotlib.mlab.isvector(X)

Like the MATLAB function with the same name, returns True if the supplied numpy array or matrix X looks like a vector, meaning it has a one non-singleton axis (i.e., it can have multiple axes, but all must have length 1, except for one of them).

If you just want to see if the array has 1 axis, use X.ndim == 1.

matplotlib.mlab.l1norm(a)

Return the l1 norm of a, flattened out.

Implemented as a separate function (not a call to norm() for speed).

matplotlib.mlab.l2norm(a)

Return the l2 norm of a, flattened out.

Implemented as a separate function (not a call to norm() for speed).

matplotlib.mlab.less_simple_linear_interpolation(x, y, xi, extrap=False)

This function provides simple (but somewhat less so than cbook.simple_linear_interpolation()) linear interpolation. simple_linear_interpolation() will give a list of point between a start and an end, while this does true linear interpolation at an arbitrary set of points.

This is very inefficient linear interpolation meant to be used only for a small number of points in relatively non-intensive use cases. For real linear interpolation, use scipy.

matplotlib.mlab.log2(x, ln2=0.6931471805599453)

Return the log(x) in base 2.

This is a _slow_ function but which is guaranteed to return the correct integer value if the input is an integer exact power of 2.

matplotlib.mlab.logspace(xmin, xmax, N)

Return N values logarithmically spaced between xmin and xmax.

Call signature:

logspace(xmin, xmax, N)

matplotlib.mlab.longest_contiguous_ones(x): Return the indices of the longest stretch of contiguous ones in x, assuming x is a vector of zeros and ones. If there are two equally long stretches, pick the first.

matplotlib.mlab.longest_ones(x): alias for longest_contiguous_ones

matplotlib.mlab.magnitude_spectrum(x, Fs=None, window=None, pad_to=None, sides=None)

Compute the magnitude (absolute value) of the frequency spectrum of x. Data is padded to a length of pad_to and the windowing function window is applied to the signal.

x: 1-D array or sequence: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer: The number of points to which the data segment is padded when performing the FFT. While not increasing the actual resolution of the spectrum (the minimum distance between resolvable peaks), this can give more points in the plot, allowing for more detail. This corresponds to the n parameter in the call to fft(). The default is None, which sets pad_to equal to the length of the input signal (i.e. no padding).

Returns the tuple (spectrum, freqs):

spectrum: 1-D array: The values for the magnitude spectrum (real valued)
freqs: 1-D array: The frequencies corresponding to the elements in spectrum

See also

psd(): psd() returns the power spectral density.
complex_spectrum(): This function returns the absolute value of complex_spectrum().
angle_spectrum(): angle_spectrum() returns the angles of the corresponding frequencies.
phase_spectrum(): phase_spectrum() returns the phase (unwrapped angle) of the corresponding frequencies.
specgram(): specgram() can return the magnitude spectrum of segments within the signal.

matplotlib.mlab.movavg(x, n): Compute the len(n) moving average of x.

matplotlib.mlab.norm_flat(a, p=2)

norm(a,p=2) -> l-p norm of a.flat

Return the l-p norm of a, considered as a flat array. This is NOT a true matrix norm, since arrays of arbitrary rank are always flattened.

p can be a number or the string ?Infinity? to get the L-infinity norm.

matplotlib.mlab.normpdf(x, *args): Return the normal pdf evaluated at x; args provides mu, sigma

matplotlib.mlab.offset_line(y, yerr)

Offsets an array y by +/- an error and returns a tuple (y - err, y + err).

The error term can be:

A scalar. In this case, the returned tuple is obvious.
A vector of the same length as y. The quantities y +/- err are computed component-wise.

A tuple of length 2. In this case, yerr[0] is the error below y and yerr[1] is error above y. For example:

from pylab import *
x = linspace(0, 2*pi, num=100, endpoint=True)
y = sin(x)
y_minus, y_plus = mlab.offset_line(y, 0.1)
plot(x, y)
fill_between(x, ym, y2=yp)
show()

matplotlib.mlab.path_length(X)

Computes the distance travelled along a polygonal curve in N dimensions.

Where X is an M x N array or matrix. Returns an array of length M consisting of the distance along the curve at each point (i.e., the rows of X).

matplotlib.mlab.phase_spectrum(x, Fs=None, window=None, pad_to=None, sides=None)

Compute the phase of the frequency spectrum (unwrapped angle spectrum) of x. Data is padded to a length of pad_to and the windowing function window is applied to the signal.

x: 1-D array or sequence: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer: The number of points to which the data segment is padded when performing the FFT. While not increasing the actual resolution of the spectrum (the minimum distance between resolvable peaks), this can give more points in the plot, allowing for more detail. This corresponds to the n parameter in the call to fft(). The default is None, which sets pad_to equal to the length of the input signal (i.e. no padding).

Returns the tuple (spectrum, freqs):

spectrum: 1-D array: The values for the phase spectrum in radians (real valued)
freqs: 1-D array: The frequencies corresponding to the elements in spectrum

See also

complex_spectrum(): This function returns the angle value of complex_spectrum().
magnitude_spectrum(): magnitude_spectrum() returns the magnitudes of the corresponding frequencies.
angle_spectrum(): angle_spectrum() returns the wrapped version of this function.
specgram(): specgram() can return the phase spectrum of segments within the signal.

matplotlib.mlab.poly_below(xmin, xs, ys)

Given a sequence of xs and ys, return the vertices of a polygon that has a horizontal base at xmin and an upper bound at the ys. xmin is a scalar.

Intended for use with matplotlib.axes.Axes.fill(), e.g.,:

xv, yv = poly_below(0, x, y)
ax.fill(xv, yv)

matplotlib.mlab.poly_between(x, ylower, yupper)

Given a sequence of x, ylower and yupper, return the polygon that fills the regions between them. ylower or yupper can be scalar or iterable. If they are iterable, they must be equal in length to x.

Return value is x, y arrays for use with matplotlib.axes.Axes.fill().

matplotlib.mlab.prctile(x, p=(0.0, 25.0, 50.0, 75.0, 100.0)): Return the percentiles of x. p can either be a sequence of percentile values or a scalar. If p is a sequence, the ith element of the return sequence is the p*(i)-th percentile of *x. If p is a scalar, the largest value of x less than or equal to the p percentage point in the sequence is returned.

matplotlib.mlab.prctile_rank(x, p)

Return the rank for each element in x, return the rank 0..len(p). e.g., if p = (25, 50, 75), the return value will be a len(x) array with values in [0,1,2,3] where 0 indicates the value is less than the 25th percentile, 1 indicates the value is >= the 25th and < 50th percentile, ... and 3 indicates the value is above the 75th percentile cutoff.

p is either an array of percentiles in [0..100] or a scalar which indicates how many quantiles of data you want ranked.

matplotlib.mlab.psd(x, NFFT=None, Fs=None, detrend=None, window=None, noverlap=None, pad_to=None, sides=None, scale_by_freq=None)

Compute the power spectral density.

Call signature:

psd(x, NFFT=256, Fs=2, detrend=mlab.detrend_none,
    window=mlab.window_hanning, noverlap=0, pad_to=None,
    sides='default', scale_by_freq=None)

The power spectral density by Welch?s average periodogram method. The vector x is divided into NFFT length segments. Each segment is detrended by function detrend and windowed by function window. noverlap gives the length of the overlap between segments. The of each segment are averaged to compute .

If len(x) < NFFT, it will be zero padded to NFFT.

x: 1-D array or sequence: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer

NFFT: integer

detrend: [ ?default? | ?constant? | ?mean? | ?linear? | ?none?] or

callable

scale_by_freq: boolean

noverlap: integer The number of points of overlap between segments. The default value is 0 (no overlap).

Returns the tuple (Pxx, freqs).

Pxx: 1-D array: The values for the power spectrum P_{xx} (real valued)
freqs: 1-D array: The frequencies corresponding to the elements in Pxx

Refs:

Bendat & Piersol ? Random Data: Analysis and Measurement Procedures, John Wiley & Sons (1986)

See also

specgram(): specgram() differs in the default overlap; in not returning the mean of the segment periodograms; and in returning the times of the segments.
magnitude_spectrum(): magnitude_spectrum() returns the magnitude spectrum.
csd(): csd() returns the spectral density between two signals.

matplotlib.mlab.quad2cubic(q0x, q0y, q1x, q1y, q2x, q2y)

Converts a quadratic Bezier curve to a cubic approximation.

The inputs are the x and y coordinates of the three control points of a quadratic curve, and the output is a tuple of x and y coordinates of the four control points of the cubic curve.

matplotlib.mlab.rec2csv(r, fname, delimiter=', ', formatd=None, missing='', missingd=None, withheader=True)

Save the data from numpy recarray r into a comma-/space-/tab-delimited file. The record array dtype names will be used for column headers.

fname: can be a filename or a file handle. Support for gzipped: files is automatic, if the filename ends in ?.gz?
withheader: if withheader is False, do not write the attribute: names in the first row

for formatd type FormatFloat, we override the precision to store full precision floats in the CSV file

See also

csv2rec(): For information about missing and missingd, which can be used to fill in masked values into your CSV file.

matplotlib.mlab.rec2txt(r, header=None, padding=3, precision=3, fields=None)

Returns a textual representation of a record array.

r: numpy recarray

header: list of column headers

padding: space between each column

precision: number of decimal places to use for floats.: Set to an integer to apply to all floats. Set to a list of integers to apply precision individually. Precision for non-floats is simply ignored.

fields : if not None, a list of field names to print. fields can be a list of strings like [?field1?, ?field2?] or a single comma separated string like ?field1,field2?

Example:

precision=[0,2,3]

Output:

ID    Price   Return
ABC   12.54    0.234
XYZ    6.32   -0.076

matplotlib.mlab.rec_append_fields(rec, names, arrs, dtypes=None): Return a new record array with field names populated with data from arrays in arrs. If appending a single field, then names, arrs and dtypes do not have to be lists. They can just be the values themselves.

matplotlib.mlab.rec_drop_fields(rec, names): Return a new numpy record array with fields in names dropped.

matplotlib.mlab.rec_groupby(r, groupby, stats)

r is a numpy record array

groupby is a sequence of record array attribute names that together form the grouping key. e.g., (?date?, ?productcode?)

stats is a sequence of (attr, func, outname) tuples which will call x = func(attr) and assign x to the record array output with attribute outname. For example:

stats = ( ('sales', len, 'numsales'), ('sales', np.mean, 'avgsale') )

Return record array has dtype names for each attribute name in the groupby argument, with the associated group values, and for each outname name in the stats argument, with the associated stat summary output.

matplotlib.mlab.rec_join(key, r1, r2, jointype='inner', defaults=None, r1postfix='1', r2postfix='2')

Join record arrays r1 and r2 on key; key is a tuple of field names ? if key is a string it is assumed to be a single attribute name. If r1 and r2 have equal values on all the keys in the key tuple, then their fields will be merged into a new record array containing the intersection of the fields of r1 and r2.

r1 (also r2) must not have any duplicate keys.

The jointype keyword can be ?inner?, ?outer?, ?leftouter?. To do a rightouter join just reverse r1 and r2.

The defaults keyword is a dictionary filled with {column_name:default_value} pairs.

The keywords r1postfix and r2postfix are postfixed to column names (other than keys) that are both in r1 and r2.

matplotlib.mlab.rec_keep_fields(rec, names): Return a new numpy record array with only fields listed in names

matplotlib.mlab.rec_summarize(r, summaryfuncs)

r is a numpy record array

summaryfuncs is a list of (attr, func, outname) tuples which will apply func to the array r*[attr] and assign the output to a new attribute name *outname. The returned record array is identical to r, with extra arrays for each element in summaryfuncs.

matplotlib.mlab.recs_join(key, name, recs, jointype='outer', missing=0.0, postfixes=None)

Join a sequence of record arrays on single column key.

This function only joins a single column of the multiple record arrays

key: is the column name that acts as a key
name: is the name of the column that we want to join
recs: is a list of record arrays to join
jointype: is a string ?inner? or ?outer?
missing: is what any missing field is replaced by
postfixes: if not None, a len recs sequence of postfixes

returns a record array with columns [rowkey, name0, name1, ... namen-1]. or if postfixes [PF0, PF1, ..., PFN-1] are supplied, [rowkey, namePF0, namePF1, ... namePFN-1].

Example:

r = recs_join("date", "close", recs=[r0, r1], missing=0.)

matplotlib.mlab.rk4(derivs, y0, t)

Integrate 1D or ND system of ODEs using 4-th order Runge-Kutta. This is a toy implementation which may be useful if you find yourself stranded on a system w/o scipy. Otherwise use scipy.integrate().

y0: initial state vector
t: sample times
derivs: returns the derivative of the system and has the signature dy = derivs(yi, ti)

Example 1

## 2D system

def derivs6(x,t):
    d1 =  x[0] + 2*x[1]
    d2 =  -3*x[0] + 4*x[1]
    return (d1, d2)
dt = 0.0005
t = arange(0.0, 2.0, dt)
y0 = (1,2)
yout = rk4(derivs6, y0, t)

Example 2:

## 1D system
alpha = 2
def derivs(x,t):
    return -alpha*x + exp(-t)

y0 = 1
yout = rk4(derivs, y0, t)

If you have access to scipy, you should probably be using the scipy.integrate tools rather than this function.

matplotlib.mlab.rms_flat(a): Return the root mean square of all the elements of a, flattened out.

matplotlib.mlab.safe_isinf(x): numpy.isinf() for arbitrary types

matplotlib.mlab.safe_isnan(x): numpy.isnan() for arbitrary types

matplotlib.mlab.segments_intersect(s1, s2)

Return True if s1 and s2 intersect. s1 and s2 are defined as:

s1: (x1, y1), (x2, y2)
s2: (x3, y3), (x4, y4)

matplotlib.mlab.slopes(x, y)

slopes() calculates the slope y?(x)

The slope is estimated using the slope obtained from that of a parabola through any three consecutive points.

This method should be superior to that described in the appendix of A CONSISTENTLY WELL BEHAVED METHOD OF INTERPOLATION by Russel W. Stineman (Creative Computing July 1980) in at least one aspect:

Circles for interpolation demand a known aspect ratio between x- and y-values. For many functions, however, the abscissa are given in different dimensions, so an aspect ratio is completely arbitrary.

The parabola method gives very similar results to the circle method for most regular cases but behaves much better in special cases.

Norbert Nemec, Institute of Theoretical Physics, University or Regensburg, April 2006 Norbert.Nemec at physik.uni-regensburg.de

(inspired by a original implementation by Halldor Bjornsson, Icelandic Meteorological Office, March 2006 halldor at vedur.is)

matplotlib.mlab.specgram(x, NFFT=None, Fs=None, detrend=None, window=None, noverlap=None, pad_to=None, sides=None, scale_by_freq=None, mode=None)

Compute a spectrogram.

Call signature:

specgram(x, NFFT=256, Fs=2,detrend=mlab.detrend_none,
        window=mlab.window_hanning, noverlap=128,
        cmap=None, xextent=None, pad_to=None, sides='default',
        scale_by_freq=None, mode='default')

Compute and plot a spectrogram of data in x. Data are split into NFFT length segments and the spectrum of each section is computed. The windowing function window is applied to each segment, and the amount of overlap of each segment is specified with noverlap.

x: 1-D array or sequence: Array or sequence containing the data

Keyword arguments:

Fs: scalar: The sampling frequency (samples per time unit). It is used to calculate the Fourier frequencies, freqs, in cycles per time unit. The default value is 2.
window: callable or ndarray: A function or a vector of length NFFT. To create window vectors see window_hanning(), window_none(), numpy.blackman(), numpy.hamming(), numpy.bartlett(), scipy.signal(), scipy.signal.get_window(), etc. The default is window_hanning(). If a function is passed as the argument, it must take a data segment as an argument and return the windowed version of the segment.
sides: [ ?default? | ?onesided? | ?twosided? ]: Specifies which sides of the spectrum to return. Default gives the default behavior, which returns one-sided for real data and both for complex data. ?onesided? forces the return of a one-sided spectrum, while ?twosided? forces two-sided.

pad_to: integer

NFFT: integer

detrend: [ ?default? | ?constant? | ?mean? | ?linear? | ?none?] or

callable

scale_by_freq: boolean

mode: [ ?default? | ?psd? | ?complex? | ?magnitude?: ?angle? | ?phase? ]
What sort of spectrum to use. Default is ?psd?. which takes the power spectral density. ?complex? returns the complex-valued frequency spectrum. ?magnitude? returns the magnitude spectrum. ?angle? returns the phase spectrum without unwrapping. ?phase? returns the phase spectrum with unwrapping.
noverlap: integer: The number of points of overlap between blocks. The default value is 128.

Returns the tuple (spectrum, freqs, t):

spectrum: 2-D array: columns are the periodograms of successive segments
freqs: 1-D array: The frequencies corresponding to the rows in spectrum
t: 1-D array: The times corresponding to midpoints of segments (i.e the columns in spectrum).

Note

detrend and scale_by_freq only apply when mode is set to ?psd?

See also

psd(): psd() differs in the default overlap; in returning the mean of the segment periodograms; and in not returning times.
complex_spectrum(): A single spectrum, similar to having a single segment when mode is ?complex?.
magnitude_spectrum(): A single spectrum, similar to having a single segment when mode is ?magnitude?.
angle_spectrum(): A single spectrum, similar to having a single segment when mode is ?angle?.
phase_spectrum(): A single spectrum, similar to having a single segment when mode is ?phase?.

matplotlib.mlab.stineman_interp(xi, x, y, yp=None)

Given data vectors x and y, the slope vector yp and a new abscissa vector xi, the function stineman_interp() uses Stineman interpolation to calculate a vector yi corresponding to xi.

Here?s an example that generates a coarse sine curve, then interpolates over a finer abscissa:

x = linspace(0,2*pi,20);  y = sin(x); yp = cos(x)
xi = linspace(0,2*pi,40);
yi = stineman_interp(xi,x,y,yp);
plot(x,y,'o',xi,yi)

The interpolation method is described in the article A CONSISTENTLY WELL BEHAVED METHOD OF INTERPOLATION by Russell W. Stineman. The article appeared in the July 1980 issue of Creative Computing with a note from the editor stating that while they were:

not an academic journal but once in a while something serious and original comes in adding that this was ?apparently a real solution? to a well known problem.

For yp = None, the routine automatically determines the slopes using the slopes() routine.

x is assumed to be sorted in increasing order.

For values xi[j] < x[0] or xi[j] > x[-1], the routine tries an extrapolation. The relevance of the data obtained from this, of course, is questionable...

Original implementation by Halldor Bjornsson, Icelandic Meteorolocial Office, March 2006 halldor at vedur.is

Completely reworked and optimized for Python by Norbert Nemec, Institute of Theoretical Physics, University or Regensburg, April 2006 Norbert.Nemec at physik.uni-regensburg.de

matplotlib.mlab.stride_repeat(x, n, axis=0)

Repeat the values in an array in a memory-efficient manner. Array x is stacked vertically n times.

Warning

It is not safe to write to the output array. Multiple elements may point to the same piece of memory, so modifying one value may change others.

Call signature:

  stride_repeat(x, n, axis=0)

*x*: 1D array or sequence
  Array or sequence containing the data.

*n*: integer
  The number of time to repeat the array.

*axis*: integer
  The axis along which the data will run.

Refs:: stackoverflaw: Repeat NumPy array without replicating data?

matplotlib.mlab.stride_windows(x, n, noverlap=None, axis=0)

Get all windows of x with length n as a single array, using strides to avoid data duplication.

Warning

It is not safe to write to the output array. Multiple elements may point to the same piece of memory, so modifying one value may change others.

Call signature:

  stride_windows(x, n, noverlap=0)

*x*: 1D array or sequence
  Array or sequence containing the data.

*n*: integer
  The number of data points in each window.

*noverlap*: integer
  The overlap between adjacent windows.
  Default is 0 (no overlap)

*axis*: integer
  The axis along which the windows will run.

Refs:: stackoverflaw: Rolling window for 1D arrays in Numpy? stackoverflaw: Using strides for an efficient moving average filter

matplotlib.mlab.vector_lengths(X, P=2.0, axis=None)

Finds the length of a set of vectors in n dimensions. This is like the numpy.norm() function for vectors, but has the ability to work over a particular axis of the supplied array or matrix.

Computes (sum((x_i)^P))^(1/P) for each {x_i} being the elements of X along the given axis. If axis is None, compute over all elements of X.

matplotlib.mlab.window_hanning(x)

Return x times the hanning window of len(x).

Call signature:

window_hanning(x)

See also

window_none(): window_none() is another window algorithm.

matplotlib.mlab.window_none(x)

No window function; simply return x.

Call signature:

window_none(x)

See also

window_hanning(): window_hanning() is another window algorithm.

Links:

http://matplotlib.org/1.5.3/api/mlab_api.html

doc_matplotlib

2017-01-22 12:14:36

Comments