Patsy: Contrast Coding Systems for categorical variables
Note
This document is based heavily on this excellent resource from UCLA.
A categorical variable of K categories, or levels, usually enters a regression as a sequence of K-1 dummy variables. This amounts to a linear hypothesis on the level means. That is, each test statistic for these variables amounts to testing whether the mean for that level is statistically significantly different from the mean of the base category. This dummy coding is called Treatment coding in R parlance, and we will follow this convention. There are, however, different coding methods that amount to different sets of linear hypotheses.
In fact, the dummy coding is not technically a contrast coding. This is because the dummy variables add to one and are not functionally independent of the model?s intercept. On the other hand, a set of contrasts for a categorical variable with k
levels is a set of k-1
functionally independent linear combinations of the factor level means that are also independent of the sum of the dummy variables. The dummy coding isn?t wrong per se. It captures all of the coefficients, but it complicates matters when the model assumes independence of the coefficients such as in ANOVA. Linear regression models do not assume independence of the coefficients and thus dummy coding is often the only coding that is taught in this context.
To have a look at the contrast matrices in Patsy, we will use data from UCLA ATS. First let?s load the data.
Example Data
In [1]: import pandas In [2]: url = 'http://www.ats.ucla.edu/stat/data/hsb2.csv' In [3]: hsb2 = pandas.read_table(url, delimiter=",")
It will be instructive to look at the mean of the dependent variable, write, for each level of race ((1 = Hispanic, 2 = Asian, 3 = African American and 4 = Caucasian)).
Treatment (Dummy) Coding
Dummy coding is likely the most well known coding scheme. It compares each level of the categorical variable to a base reference level. The base reference level is the value of the intercept. It is the default contrast in Patsy for unordered categorical factors. The Treatment contrast matrix for race would be
In [4]: from patsy.contrasts import Treatment In [5]: levels = [1,2,3,4] In [6]: contrast = Treatment(reference=0).code_without_intercept(levels) In [7]: print contrast.matrix [[ 0. 0. 0.] [ 1. 0. 0.] [ 0. 1. 0.] [ 0. 0. 1.]]
Here we used reference=0
, which implies that the first level, Hispanic, is the reference category against which the other level effects are measured. As mentioned above, the columns do not sum to zero and are thus not independent of the intercept. To be explicit, let?s look at how this would encode the race
variable.
In [8]: contrast.matrix[hsb2.race-1, :][:20] Out[8]: array([[ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 1., 0.], [ 0., 0., 0.], [ 0., 0., 1.], [ 0., 1., 0.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 1., 0.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.], [ 0., 0., 1.]])
This is a bit of a trick, as the race
category conveniently maps to zero-based indices. If it does not, this conversion happens under the hood, so this won?t work in general but nonetheless is a useful exercise to fix ideas. The below illustrates the output using the three contrasts above
In [9]: from statsmodels.formula.api import ols In [10]: mod = ols("write ~ C(race, Treatment)", data=hsb2) In [11]: res = mod.fit() In [12]: print res.summary() OLS Regression Results ============================================================================== Dep. Variable: write R-squared: 0.107 Model: OLS Adj. R-squared: 0.093 Method: Least Squares F-statistic: 7.833 Date: Tue, 02 Dec 2014 Prob (F-statistic): 5.78e-05 Time: 12:54:32 Log-Likelihood: -721.77 No. Observations: 200 AIC: 1452. Df Residuals: 196 BIC: 1465. Df Model: 3 Covariance Type: nonrobust =========================================================================================== coef std err t P>|t| [95.0% Conf. Int.] ------------------------------------------------------------------------------------------- Intercept 46.4583 1.842 25.218 0.000 42.825 50.091 C(race, Treatment)[T.2] 11.5417 3.286 3.512 0.001 5.061 18.022 C(race, Treatment)[T.3] 1.7417 2.732 0.637 0.525 -3.647 7.131 C(race, Treatment)[T.4] 7.5968 1.989 3.820 0.000 3.675 11.519 ============================================================================== Omnibus: 10.487 Durbin-Watson: 1.779 Prob(Omnibus): 0.005 Jarque-Bera (JB): 11.031 Skew: -0.551 Prob(JB): 0.00402 Kurtosis: 2.670 Cond. No. 8.25 ============================================================================== Warnings: [1] Standard Errors assume that the covariance matrix of the errors is correctly specified.
We explicitly gave the contrast for race; however, since Treatment is the default, we could have omitted this.
Simple Coding
Like Treatment Coding, Simple Coding compares each level to a fixed reference level. However, with simple coding, the intercept is the grand mean of all the levels of the factors. See User-Defined Coding for how to implement the Simple contrast.
In [13]: contrast = Simple().code_without_intercept(levels) In [14]: print contrast.matrix [[-0.25 -0.25 -0.25] [ 0.75 -0.25 -0.25] [-0.25 0.75 -0.25] [-0.25 -0.25 0.75]] In [15]: mod = ols("write ~ C(race, Simple)", data=hsb2) In [16]: res = mod.fit() In [17]: print res.summary() OLS Regression Results ============================================================================== Dep. Variable: write R-squared: 0.107 Model: OLS Adj. R-squared: 0.093 Method: Least Squares F-statistic: 7.833 Date: Tue, 02 Dec 2014 Prob (F-statistic): 5.78e-05 Time: 12:54:32 Log-Likelihood: -721.77 No. Observations: 200 AIC: 1452. Df Residuals: 196 BIC: 1465. Df Model: 3 Covariance Type: nonrobust =========================================================================================== coef std err t P>|t| [95.0% Conf. Int.] ------------------------------------------------------------------------------------------- Intercept 51.6784 0.982 52.619 0.000 49.741 53.615 C(race, Simple)[Simp.1] 11.5417 3.286 3.512 0.001 5.061 18.022 C(race, Simple)[Simp.2] 1.7417 2.732 0.637 0.525 -3.647 7.131 C(race, Simple)[Simp.3] 7.5968 1.989 3.820 0.000 3.675 11.519 ============================================================================== Omnibus: 10.487 Durbin-Watson: 1.779 Prob(Omnibus): 0.005 Jarque-Bera (JB): 11.031 Skew: -0.551 Prob(JB): 0.00402 Kurtosis: 2.670 Cond. No. 7.03 ============================================================================== Warnings: [1] Standard Errors assume that the covariance matrix of the errors is correctly specified.
Sum (Deviation) Coding
Sum coding compares the mean of the dependent variable for a given level to the overall mean of the dependent variable over all the levels. That is, it uses contrasts between each of the first k-1 levels and level k In this example, level 1 is compared to all the others, level 2 to all the others, and level 3 to all the others.
In [18]: from patsy.contrasts import Sum In [19]: contrast = Sum().code_without_intercept(levels) In [20]: print contrast.matrix [[ 1. 0. 0.] [ 0. 1. 0.] [ 0. 0. 1.] [-1. -1. -1.]] In [21]: mod = ols("write ~ C(race, Sum)", data=hsb2) In [22]: res = mod.fit() In [23]: print res.summary() OLS Regression Results ============================================================================== Dep. Variable: write R-squared: 0.107 Model: OLS Adj. R-squared: 0.093 Method: Least Squares F-statistic: 7.833 Date: Tue, 02 Dec 2014 Prob (F-statistic): 5.78e-05 Time: 12:54:32 Log-Likelihood: -721.77 No. Observations: 200 AIC: 1452. Df Residuals: 196 BIC: 1465. Df Model: 3 Covariance Type: nonrobust ===================================================================================== coef std err t P>|t| [95.0% Conf. Int.] ------------------------------------------------------------------------------------- Intercept 51.6784 0.982 52.619 0.000 49.741 53.615 C(race, Sum)[S.1] -5.2200 1.631 -3.200 0.002 -8.437 -2.003 C(race, Sum)[S.2] 6.3216 2.160 2.926 0.004 2.061 10.582 C(race, Sum)[S.3] -3.4784 1.732 -2.008 0.046 -6.895 -0.062 ============================================================================== Omnibus: 10.487 Durbin-Watson: 1.779 Prob(Omnibus): 0.005 Jarque-Bera (JB): 11.031 Skew: -0.551 Prob(JB): 0.00402 Kurtosis: 2.670 Cond. No. 6.72 ============================================================================== Warnings: [1] Standard Errors assume that the covariance matrix of the errors is correctly specified.
This correspons to a parameterization that forces all the coefficients to sum to zero. Notice that the intercept here is the grand mean where the grand mean is the mean of means of the dependent variable by each level.
In [24]: hsb2.groupby('race')['write'].mean().mean() Out[24]: 51.678376436781619
Backward Difference Coding
In backward difference coding, the mean of the dependent variable for a level is compared with the mean of the dependent variable for the prior level. This type of coding may be useful for a nominal or an ordinal variable.
In [25]: from patsy.contrasts import Diff In [26]: contrast = Diff().code_without_intercept(levels) In [27]: print contrast.matrix [[-0.75 -0.5 -0.25] [ 0.25 -0.5 -0.25] [ 0.25 0.5 -0.25] [ 0.25 0.5 0.75]] In [28]: mod = ols("write ~ C(race, Diff)", data=hsb2) In [29]: res = mod.fit() In [30]: print res.summary() OLS Regression Results ============================================================================== Dep. Variable: write R-squared: 0.107 Model: OLS Adj. R-squared: 0.093 Method: Least Squares F-statistic: 7.833 Date: Tue, 02 Dec 2014 Prob (F-statistic): 5.78e-05 Time: 12:54:32 Log-Likelihood: -721.77 No. Observations: 200 AIC: 1452. Df Residuals: 196 BIC: 1465. Df Model: 3 Covariance Type: nonrobust ====================================================================================== coef std err t P>|t| [95.0% Conf. Int.] -------------------------------------------------------------------------------------- Intercept 51.6784 0.982 52.619 0.000 49.741 53.615 C(race, Diff)[D.1] 11.5417 3.286 3.512 0.001 5.061 18.022 C(race, Diff)[D.2] -9.8000 3.388 -2.893 0.004 -16.481 -3.119 C(race, Diff)[D.3] 5.8552 2.153 2.720 0.007 1.610 10.101 ============================================================================== Omnibus: 10.487 Durbin-Watson: 1.779 Prob(Omnibus): 0.005 Jarque-Bera (JB): 11.031 Skew: -0.551 Prob(JB): 0.00402 Kurtosis: 2.670 Cond. No. 8.30 ============================================================================== Warnings: [1] Standard Errors assume that the covariance matrix of the errors is correctly specified.
For example, here the coefficient on level 1 is the mean of write
at level 2 compared with the mean at level 1. Ie.,
In [31]: res.params["C(race, Diff)[D.1]"] Out[31]: 11.541666666666604 In [32]: hsb2.groupby('race').mean()["write"][2] - \ ....: hsb2.groupby('race').mean()["write"][1] ....: Out[32]: 11.541666666666664
Helmert Coding
Our version of Helmert coding is sometimes referred to as Reverse Helmert Coding. The mean of the dependent variable for a level is compared to the mean of the dependent variable over all previous levels. Hence, the name ?reverse? being sometimes applied to differentiate from forward Helmert coding. This comparison does not make much sense for a nominal variable such as race, but we would use the Helmert contrast like so:
In [33]: from patsy.contrasts import Helmert In [34]: contrast = Helmert().code_without_intercept(levels) In [35]: print contrast.matrix [[-1. -1. -1.] [ 1. -1. -1.] [ 0. 2. -1.] [ 0. 0. 3.]] In [36]: mod = ols("write ~ C(race, Helmert)", data=hsb2) In [37]: res = mod.fit() In [38]: print res.summary() OLS Regression Results ============================================================================== Dep. Variable: write R-squared: 0.107 Model: OLS Adj. R-squared: 0.093 Method: Least Squares F-statistic: 7.833 Date: Tue, 02 Dec 2014 Prob (F-statistic): 5.78e-05 Time: 12:54:32 Log-Likelihood: -721.77 No. Observations: 200 AIC: 1452. Df Residuals: 196 BIC: 1465. Df Model: 3 Covariance Type: nonrobust ========================================================================================= coef std err t P>|t| [95.0% Conf. Int.] ----------------------------------------------------------------------------------------- Intercept 51.6784 0.982 52.619 0.000 49.741 53.615 C(race, Helmert)[H.2] 5.7708 1.643 3.512 0.001 2.530 9.011 C(race, Helmert)[H.3] -1.3431 0.867 -1.548 0.123 -3.054 0.368 C(race, Helmert)[H.4] 0.7923 0.372 2.130 0.034 0.059 1.526 ============================================================================== Omnibus: 10.487 Durbin-Watson: 1.779 Prob(Omnibus): 0.005 Jarque-Bera (JB): 11.031 Skew: -0.551 Prob(JB): 0.00402 Kurtosis: 2.670 Cond. No. 7.26 ============================================================================== Warnings: [1] Standard Errors assume that the covariance matrix of the errors is correctly specified.
To illustrate, the comparison on level 4 is the mean of the dependent variable at the previous three levels taken from the mean at level 4
In [39]: grouped = hsb2.groupby('race') In [40]: grouped.mean()["write"][4] - grouped.mean()["write"][:3].mean() Out[40]: 3.1690613026819818
As you can see, these are only equal up to a constant. Other versions of the Helmert contrast give the actual difference in means. Regardless, the hypothesis tests are the same.
In [41]: k = 4 In [42]: 1./k * (grouped.mean()["write"][k] - grouped.mean()["write"][:k-1].mean()) Out[42]: 0.79226532567049546 In [43]: k = 3 In [44]: 1./k * (grouped.mean()["write"][k] - grouped.mean()["write"][:k-1].mean()) Out[44]: -1.3430555555555561
Orthogonal Polynomial Coding
The coefficients taken on by polynomial coding for k=4
levels are the linear, quadratic, and cubic trends in the categorical variable. The categorical variable here is assumed to be represented by an underlying, equally spaced numeric variable. Therefore, this type of encoding is used only for ordered categorical variables with equal spacing. In general, the polynomial contrast produces polynomials of order k-1
. Since race
is not an ordered factor variable let?s use read
as an example. First we need to create an ordered categorical from read
.
In [45]: _, bins = np.histogram(hsb2.read, 3) In [46]: try: # requires numpy master ....: readcat = np.digitize(hsb2.read, bins, True) ....: except: ....: readcat = np.digitize(hsb2.read, bins) ....: In [47]: hsb2['readcat'] = readcat In [48]: hsb2.groupby('readcat').mean()['write'] Out[48]: readcat 0 46.000000 1 44.980392 2 53.356436 3 60.127660 Name: write, dtype: float64
In [49]: from patsy.contrasts import Poly In [50]: levels = hsb2.readcat.unique().tolist() In [51]: contrast = Poly().code_without_intercept(levels) In [52]: print contrast.matrix [[-0.6708 0.5 -0.2236] [-0.2236 -0.5 0.6708] [ 0.2236 -0.5 -0.6708] [ 0.6708 0.5 0.2236]] In [53]: mod = ols("write ~ C(readcat, Poly)", data=hsb2) In [54]: res = mod.fit() In [55]: print res.summary() OLS Regression Results ============================================================================== Dep. Variable: write R-squared: 0.320 Model: OLS Adj. R-squared: 0.309 Method: Least Squares F-statistic: 30.73 Date: Tue, 02 Dec 2014 Prob (F-statistic): 2.51e-16 Time: 12:54:32 Log-Likelihood: -694.54 No. Observations: 200 AIC: 1397. Df Residuals: 196 BIC: 1410. Df Model: 3 Covariance Type: nonrobust ============================================================================================== coef std err t P>|t| [95.0% Conf. Int.] ---------------------------------------------------------------------------------------------- Intercept 51.1161 2.018 25.324 0.000 47.135 55.097 C(readcat, Poly).Linear 11.3501 5.348 2.122 0.035 0.803 21.897 C(readcat, Poly).Quadratic 3.8954 4.037 0.965 0.336 -4.066 11.857 C(readcat, Poly).Cubic -2.4598 1.998 -1.231 0.220 -6.400 1.480 ============================================================================== Omnibus: 9.741 Durbin-Watson: 1.699 Prob(Omnibus): 0.008 Jarque-Bera (JB): 10.263 Skew: -0.535 Prob(JB): 0.00591 Kurtosis: 2.703 Cond. No. 13.7 ============================================================================== Warnings: [1] Standard Errors assume that the covariance matrix of the errors is correctly specified.
As you can see, readcat has a significant linear effect on the dependent variable write
but not a significant quadratic or cubic effect.
User-Defined Coding
If you want to use your own coding, you must do so by writing a coding class that contains a code_with_intercept and a code_without_intercept method that return a patsy.contrast.ContrastMatrix
instance.
In [56]: from patsy.contrasts import ContrastMatrix In [57]: def _name_levels(prefix, levels): ....: return ["[%s%s]" % (prefix, level) for level in levels] ....: In [58]: class Simple(object): ....: def _simple_contrast(self, levels): ....: nlevels = len(levels) ....: contr = -1./nlevels * np.ones((nlevels, nlevels-1)) ....: contr[1:][np.diag_indices(nlevels-1)] = (nlevels-1.)/nlevels ....: return contr ....: In [59]: def code_with_intercept(self, levels): ....: contrast = np.column_stack((np.ones(len(levels)), ....: self._simple_contrast(levels))) ....: return ContrastMatrix(contrast, _name_levels("Simp.", levels)) ....:
Please login to continue.