Apache Module mod_ssl
Description: | Strong cryptography using the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols |
---|---|
Status: | Extension |
ModuleIdentifier: | ssl_module |
SourceFile: | mod_ssl.c |
Summary
This module provides SSL v3 and TLS v1.x support for the Apache HTTP Server. SSL v2 is no longer supported.
This module relies on OpenSSL to provide the cryptography engine.
Further details, discussion, and examples are provided in the SSL documentation.
Environment Variables
This module can be configured to provide several items of SSL information as additional environment variables to the SSI and CGI namespace. This information is not provided by default for performance reasons. (See SSLOptions
StdEnvVars, below.) The generated variables are listed in the table below. For backward compatibility the information can be made available under different names, too. Look in the Compatibility chapter for details on the compatibility variables.
Variable Name: | Value Type: | Description: |
---|---|---|
HTTPS | flag | HTTPS is being used. |
SSL_PROTOCOL | string | The SSL protocol version (SSLv3, TLSv1, TLSv1.1, TLSv1.2) |
SSL_SESSION_ID | string | The hex-encoded SSL session id |
SSL_SESSION_RESUMED | string | Initial or Resumed SSL Session. Note: multiple requests may be served over the same (Initial or Resumed) SSL session if HTTP KeepAlive is in use |
SSL_SECURE_RENEG | string |
true if secure renegotiation is supported, else false
|
SSL_CIPHER | string | The cipher specification name |
SSL_CIPHER_EXPORT | string |
true if cipher is an export cipher |
SSL_CIPHER_USEKEYSIZE | number | Number of cipher bits (actually used) |
SSL_CIPHER_ALGKEYSIZE | number | Number of cipher bits (possible) |
SSL_COMPRESS_METHOD | string | SSL compression method negotiated |
SSL_VERSION_INTERFACE | string | The mod_ssl program version |
SSL_VERSION_LIBRARY | string | The OpenSSL program version |
SSL_CLIENT_M_VERSION | string | The version of the client certificate |
SSL_CLIENT_M_SERIAL | string | The serial of the client certificate |
SSL_CLIENT_S_DN | string | Subject DN in client's certificate |
SSL_CLIENT_S_DN_ x509
| string | Component of client's Subject DN |
SSL_CLIENT_SAN_Email_ n
| string | Client certificate's subjectAltName extension entries of type rfc822Name |
SSL_CLIENT_SAN_DNS_ n
| string | Client certificate's subjectAltName extension entries of type dNSName |
SSL_CLIENT_SAN_OTHER_msUPN_ n
| string | Client certificate's subjectAltName extension entries of type otherName, Microsoft User Principal Name form (OID 1.3.6.1.4.1.311.20.2.3) |
SSL_CLIENT_I_DN | string | Issuer DN of client's certificate |
SSL_CLIENT_I_DN_ x509
| string | Component of client's Issuer DN |
SSL_CLIENT_V_START | string | Validity of client's certificate (start time) |
SSL_CLIENT_V_END | string | Validity of client's certificate (end time) |
SSL_CLIENT_V_REMAIN | string | Number of days until client's certificate expires |
SSL_CLIENT_A_SIG | string | Algorithm used for the signature of client's certificate |
SSL_CLIENT_A_KEY | string | Algorithm used for the public key of client's certificate |
SSL_CLIENT_CERT | string | PEM-encoded client certificate |
SSL_CLIENT_CERT_CHAIN_ n
| string | PEM-encoded certificates in client certificate chain |
SSL_CLIENT_CERT_RFC4523_CEA | string | Serial number and issuer of the certificate. The format matches that of the CertificateExactAssertion in RFC4523 |
SSL_CLIENT_VERIFY | string |
NONE , SUCCESS , GENEROUS or FAILED: reason
|
SSL_SERVER_M_VERSION | string | The version of the server certificate |
SSL_SERVER_M_SERIAL | string | The serial of the server certificate |
SSL_SERVER_S_DN | string | Subject DN in server's certificate |
SSL_SERVER_SAN_Email_ n
| string | Server certificate's subjectAltName extension entries of type rfc822Name |
SSL_SERVER_SAN_DNS_ n
| string | Server certificate's subjectAltName extension entries of type dNSName |
SSL_SERVER_SAN_OTHER_dnsSRV_ n
| string | Server certificate's subjectAltName extension entries of type otherName, SRVName form (OID 1.3.6.1.5.5.7.8.7, RFC 4985) |
SSL_SERVER_S_DN_ x509
| string | Component of server's Subject DN |
SSL_SERVER_I_DN | string | Issuer DN of server's certificate |
SSL_SERVER_I_DN_ x509
| string | Component of server's Issuer DN |
SSL_SERVER_V_START | string | Validity of server's certificate (start time) |
SSL_SERVER_V_END | string | Validity of server's certificate (end time) |
SSL_SERVER_A_SIG | string | Algorithm used for the signature of server's certificate |
SSL_SERVER_A_KEY | string | Algorithm used for the public key of server's certificate |
SSL_SERVER_CERT | string | PEM-encoded server certificate |
SSL_SRP_USER | string | SRP username |
SSL_SRP_USERINFO | string | SRP user info |
SSL_TLS_SNI | string | Contents of the SNI TLS extension (if supplied with ClientHello) |
x509 specifies a component of an X.509 DN; one of C,ST,L,O,OU,CN,T,I,G,S,D,UID,Email
. In Apache 2.1 and later, x509 may also include a numeric _n
suffix. If the DN in question contains multiple attributes of the same name, this suffix is used as a zero-based index to select a particular attribute. For example, where the server certificate subject DN included two OU attributes, SSL_SERVER_S_DN_OU_0
and SSL_SERVER_S_DN_OU_1
could be used to reference each. A variable name without a _n
suffix is equivalent to that name with a _0
suffix; the first (or only) attribute. When the environment table is populated using the StdEnvVars
option of the SSLOptions
directive, the first (or only) attribute of any DN is added only under a non-suffixed name; i.e. no _0
suffixed entries are added.
The format of the *_DN variables has changed in Apache HTTPD 2.3.11. See the LegacyDNStringFormat
option for SSLOptions
for details.
SSL_CLIENT_V_REMAIN
is only available in version 2.1 and later.
A number of additional environment variables can also be used in SSLRequire
expressions, or in custom log formats:
HTTP_USER_AGENT PATH_INFO AUTH_TYPE HTTP_REFERER QUERY_STRING SERVER_SOFTWARE HTTP_COOKIE REMOTE_HOST API_VERSION HTTP_FORWARDED REMOTE_IDENT TIME_YEAR HTTP_HOST IS_SUBREQ TIME_MON HTTP_PROXY_CONNECTION DOCUMENT_ROOT TIME_DAY HTTP_ACCEPT SERVER_ADMIN TIME_HOUR THE_REQUEST SERVER_NAME TIME_MIN REQUEST_FILENAME SERVER_PORT TIME_SEC REQUEST_METHOD SERVER_PROTOCOL TIME_WDAY REQUEST_SCHEME REMOTE_ADDR TIME REQUEST_URI REMOTE_USER
In these contexts, two special formats can also be used:
ENV:variablename
- This will expand to the standard environment variable variablename.
HTTP:headername
- This will expand to the value of the request header with name headername.
Custom Log Formats
When mod_ssl
is built into Apache or at least loaded (under DSO situation) additional functions exist for the Custom Log Format of mod_log_config
. First there is an additional ``%{
varname}x
'' eXtension format function which can be used to expand any variables provided by any module, especially those provided by mod_ssl which can you find in the above table.
For backward compatibility there is additionally a special ``%{
name}c
'' cryptography format function provided. Information about this function is provided in the Compatibility chapter.
Example
CustomLog "logs/ssl_request_log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
These formats even work without setting the StdEnvVars
option of the SSLOptions
directive.
Request Notes
mod_ssl
sets "notes" for the request which can be used in logging with the %{name}n
format string in mod_log_config
.
The notes supported are as follows:
ssl-access-forbidden
- This note is set to the value
1
if access was denied due to anSSLRequire
orSSLRequireSSL
directive. ssl-secure-reneg
- If
mod_ssl
is built against a version of OpenSSL which supports the secure renegotiation extension, this note is set to the value1
if SSL is in used for the current connection, and the client also supports the secure renegotiation extension. If the client does not support the secure renegotiation extension, the note is set to the value0
. Ifmod_ssl
is not built against a version of OpenSSL which supports secure renegotiation, or if SSL is not in use for the current connection, the note is not set.
Expression Parser Extension
When mod_ssl
is built into Apache or at least loaded (under DSO situation) any variables provided by mod_ssl
can be used in expressions for the ap_expr Expression Parser. The variables can be referenced using the syntax ``%{
varname}
''. Starting with version 2.4.18 one can also use the mod_rewrite
style syntax ``%{SSL:
varname}
'' or the function style syntax ``ssl(
varname)
''.
Example (using mod_headers
)
Header set X-SSL-PROTOCOL "expr=%{SSL_PROTOCOL}" Header set X-SSL-CIPHER "expr=%{SSL:SSL_CIPHER}"
This feature even works without setting the StdEnvVars
option of the SSLOptions
directive.
Authorization providers for use with Require
mod_ssl
provides a few authentication providers for use with mod_authz_core
's Require
directive.
Require ssl
The ssl
provider denies access if a connection is not encrypted with SSL. This is similar to the SSLRequireSSL
directive.
Require ssl
Require ssl-verify-client
The ssl
provider allows access if the user is authenticated with a valid client certificate. This is only useful if SSLVerifyClient optional
is in effect.
The following example grants access if the user is authenticated either with a client certificate or by username and password.
Require ssl-verify-client Require valid-user
SSLCACertificateFile Directive
Description: | File of concatenated PEM-encoded CA Certificates for Client Auth |
---|---|
Syntax: | SSLCACertificateFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the all-in-one file where you can assemble the Certificates of Certification Authorities (CA) whose clients you deal with. These are used for Client Authentication. Such a file is simply the concatenation of the various PEM-encoded Certificate files, in order of preference. This can be used alternatively and/or additionally to SSLCACertificatePath
.
Example
SSLCACertificateFile "/usr/local/apache2/conf/ssl.crt/ca-bundle-client.crt"
SSLCACertificatePath Directive
Description: | Directory of PEM-encoded CA Certificates for Client Auth |
---|---|
Syntax: | SSLCACertificatePath directory-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the directory where you keep the Certificates of Certification Authorities (CAs) whose clients you deal with. These are used to verify the client certificate on Client Authentication.
The files in this directory have to be PEM-encoded and are accessed through hash filenames. So usually you can't just place the Certificate files there: you also have to create symbolic links named hash-value.N
. And you should always make sure this directory contains the appropriate symbolic links.
Example
SSLCACertificatePath "/usr/local/apache2/conf/ssl.crt/"
SSLCADNRequestFile Directive
Description: | File of concatenated PEM-encoded CA Certificates for defining acceptable CA names |
---|---|
Syntax: | SSLCADNRequestFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
When a client certificate is requested by mod_ssl, a list of acceptable Certificate Authority names is sent to the client in the SSL handshake. These CA names can be used by the client to select an appropriate client certificate out of those it has available.
If neither of the directives SSLCADNRequestPath
or SSLCADNRequestFile
are given, then the set of acceptable CA names sent to the client is the names of all the CA certificates given by the SSLCACertificateFile
and SSLCACertificatePath
directives; in other words, the names of the CAs which will actually be used to verify the client certificate.
In some circumstances, it is useful to be able to send a set of acceptable CA names which differs from the actual CAs used to verify the client certificate - for example, if the client certificates are signed by intermediate CAs. In such cases, SSLCADNRequestPath
and/or SSLCADNRequestFile
can be used; the acceptable CA names are then taken from the complete set of certificates in the directory and/or file specified by this pair of directives.
SSLCADNRequestFile
must specify an all-in-one file containing a concatenation of PEM-encoded CA certificates.
Example
SSLCADNRequestFile "/usr/local/apache2/conf/ca-names.crt"
SSLCADNRequestPath Directive
Description: | Directory of PEM-encoded CA Certificates for defining acceptable CA names |
---|---|
Syntax: | SSLCADNRequestPath directory-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This optional directive can be used to specify the set of acceptable CA names which will be sent to the client when a client certificate is requested. See the SSLCADNRequestFile
directive for more details.
The files in this directory have to be PEM-encoded and are accessed through hash filenames. So usually you can't just place the Certificate files there: you also have to create symbolic links named hash-value.N
. And you should always make sure this directory contains the appropriate symbolic links.
Example
SSLCADNRequestPath "/usr/local/apache2/conf/ca-names.crt/"
SSLCARevocationCheck Directive
Description: | Enable CRL-based revocation checking |
---|---|
Syntax: | SSLCARevocationCheck chain|leaf|none flags |
Default: | SSLCARevocationCheck none |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Optional flags available in httpd 2.5-dev or later |
Enables certificate revocation list (CRL) checking. At least one of SSLCARevocationFile
or SSLCARevocationPath
must be configured. When set to chain
(recommended setting), CRL checks are applied to all certificates in the chain, while setting it to leaf
limits the checks to the end-entity cert.
The available flags are:
-
no_crl_for_cert_ok
Prior to version 2.3.15, CRL checking in mod_ssl also succeeded when no CRL(s) for the checked certificate(s) were found in any of the locations configured with
SSLCARevocationFile
orSSLCARevocationPath
.With the introduction of
SSLCARevocationFile
, the behavior has been changed: by default withchain
orleaf
, CRLs must be present for the validation to succeed - otherwise it will fail with an"unable to get certificate CRL"
error.The flag
no_crl_for_cert_ok
allows to restore previous behaviour.
Example
SSLCARevocationCheck chain
Compatibility with versions 2.2
SSLCARevocationCheck chain no_crl_for_cert_ok
SSLCARevocationFile Directive
Description: | File of concatenated PEM-encoded CA CRLs for Client Auth |
---|---|
Syntax: | SSLCARevocationFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the all-in-one file where you can assemble the Certificate Revocation Lists (CRL) of Certification Authorities (CA) whose clients you deal with. These are used for Client Authentication. Such a file is simply the concatenation of the various PEM-encoded CRL files, in order of preference. This can be used alternatively and/or additionally to SSLCARevocationPath
.
Example
SSLCARevocationFile "/usr/local/apache2/conf/ssl.crl/ca-bundle-client.crl"
SSLCARevocationPath Directive
Description: | Directory of PEM-encoded CA CRLs for Client Auth |
---|---|
Syntax: | SSLCARevocationPath directory-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the directory where you keep the Certificate Revocation Lists (CRL) of Certification Authorities (CAs) whose clients you deal with. These are used to revoke the client certificate on Client Authentication.
The files in this directory have to be PEM-encoded and are accessed through hash filenames. So usually you have not only to place the CRL files there. Additionally you have to create symbolic links named hash-value.rN
. And you should always make sure this directory contains the appropriate symbolic links.
Example
SSLCARevocationPath "/usr/local/apache2/conf/ssl.crl/"
SSLCertificateChainFile Directive
Description: | File of PEM-encoded Server CA Certificates |
---|---|
Syntax: | SSLCertificateChainFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
SSLCertificateChainFile is deprecated
SSLCertificateChainFile
became obsolete with version 2.4.8, when SSLCertificateFile
was extended to also load intermediate CA certificates from the server certificate file.
This directive sets the optional all-in-one file where you can assemble the certificates of Certification Authorities (CA) which form the certificate chain of the server certificate. This starts with the issuing CA certificate of the server certificate and can range up to the root CA certificate. Such a file is simply the concatenation of the various PEM-encoded CA Certificate files, usually in certificate chain order.
This should be used alternatively and/or additionally to SSLCACertificatePath
for explicitly constructing the server certificate chain which is sent to the browser in addition to the server certificate. It is especially useful to avoid conflicts with CA certificates when using client authentication. Because although placing a CA certificate of the server certificate chain into SSLCACertificatePath
has the same effect for the certificate chain construction, it has the side-effect that client certificates issued by this same CA certificate are also accepted on client authentication.
But be careful: Providing the certificate chain works only if you are using a single RSA or DSA based server certificate. If you are using a coupled RSA+DSA certificate pair, this will work only if actually both certificates use the same certificate chain. Else the browsers will be confused in this situation.
Example
SSLCertificateChainFile "/usr/local/apache2/conf/ssl.crt/ca.crt"
SSLCertificateFile Directive
Description: | Server PEM-encoded X.509 certificate data file |
---|---|
Syntax: | SSLCertificateFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive points to a file with certificate data in PEM format. At a minimum, the file must include an end-entity (leaf) certificate. The directive can be used multiple times (referencing different filenames) to support multiple algorithms for server authentication - typically RSA, DSA, and ECC. The number of supported algorithms depends on the OpenSSL version being used for mod_ssl: with version 1.0.0 or later, openssl list-public-key-algorithms
will output a list of supported algorithms, see also the note below about limitations of OpenSSL versions prior to 1.0.2 and the ways to work around them.
The files may also include intermediate CA certificates, sorted from leaf to root. This is supported with version 2.4.8 and later, and obsoletes SSLCertificateChainFile
. When running with OpenSSL 1.0.2 or later, this allows to configure the intermediate CA chain on a per-certificate basis.
Custom DH parameters and an EC curve name for ephemeral keys, can also be added to end of the first file configured using SSLCertificateFile
. This is supported in version 2.4.7 or later. Such parameters can be generated using the commands openssl dhparam
and openssl ecparam
. The parameters can be added as-is to the end of the first certificate file. Only the first file can be used for custom parameters, as they are applied independently of the authentication algorithm type.
Finally the end-entity certificate's private key can also be added to the certificate file instead of using a separate SSLCertificateKeyFile
directive. This practice is highly discouraged. If it is used, the certificate files using such an embedded key must be configured after the certificates using a separate key file. If the private key is encrypted, the pass phrase dialog is forced at startup time.
DH parameter interoperability with primes > 1024 bit
Beginning with version 2.4.7, mod_ssl makes use of standardized DH parameters with prime lengths of 2048, 3072 and 4096 bits and with additional prime lengths of 6144 and 8192 bits beginning with version 2.4.10 (from RFC 3526), and hands them out to clients based on the length of the certificate's RSA/DSA key. With Java-based clients in particular (Java 7 or earlier), this may lead to handshake failures - see this FAQ answer for working around such issues.
Default DH parameters when using multiple certificates and OpenSSL versions prior to 1.0.2
When using multiple certificates to support different authentication algorithms (like RSA, DSA, but mainly ECC) and OpenSSL prior to 1.0.2, it is recommended to either use custom DH parameters (preferably) by adding them to the first certificate file (as described above), or to order the SSLCertificateFile
directives such that RSA/DSA certificates are placed after the ECC one.
This is due to a limitation in older versions of OpenSSL which don't let the Apache HTTP Server determine the currently selected certificate at handshake time (when the DH parameters must be sent to the peer) but instead always provide the last configured certificate. Consequently, the server may select default DH parameters based on the length of the wrong certificate's key (ECC keys are much smaller than RSA/DSA ones and their length is not relevant for selecting DH primes).
Since custom DH parameters always take precedence over the default ones, this issue can be avoided by creating and configuring them (as described above), thus using a custom/suitable length.
Example
SSLCertificateFile "/usr/local/apache2/conf/ssl.crt/server.crt"
SSLCertificateKeyFile Directive
Description: | Server PEM-encoded private key file |
---|---|
Syntax: | SSLCertificateKeyFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive points to the PEM-encoded private key file for the server. If the contained private key is encrypted, the pass phrase dialog is forced at startup time.
The directive can be used multiple times (referencing different filenames) to support multiple algorithms for server authentication. For each SSLCertificateKeyFile
directive, there must be a matching SSLCertificateFile
directive.
The private key may also be combined with the certificate in the file given by SSLCertificateFile
, but this practice is highly discouraged. If it is used, the certificate files using such an embedded key must be configured after the certificates using a separate key file.
Example
SSLCertificateKeyFile "/usr/local/apache2/conf/ssl.key/server.key"
SSLCipherSuite Directive
Description: | Cipher Suite available for negotiation in SSL handshake |
---|---|
Syntax: | SSLCipherSuite cipher-spec |
Default: | SSLCipherSuite DEFAULT (depends on OpenSSL version) |
Context: | server config, virtual host, directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
This complex directive uses a colon-separated cipher-spec string consisting of OpenSSL cipher specifications to configure the Cipher Suite the client is permitted to negotiate in the SSL handshake phase. Notice that this directive can be used both in per-server and per-directory context. In per-server context it applies to the standard SSL handshake when a connection is established. In per-directory context it forces a SSL renegotiation with the reconfigured Cipher Suite after the HTTP request was read but before the HTTP response is sent.
An SSL cipher specification in cipher-spec is composed of 4 major attributes plus a few extra minor ones:
-
Key Exchange Algorithm:
RSA, Diffie-Hellman, Elliptic Curve Diffie-Hellman, Secure Remote Password -
Authentication Algorithm:
RSA, Diffie-Hellman, DSS, ECDSA, or none. -
Cipher/Encryption Algorithm:
AES, DES, Triple-DES, RC4, RC2, IDEA, etc. -
MAC Digest Algorithm:
MD5, SHA or SHA1, SHA256, SHA384.
An SSL cipher can also be an export cipher. SSLv2 ciphers are no longer supported. To specify which ciphers to use, one can either specify all the Ciphers, one at a time, or use aliases to specify the preference and order for the ciphers (see Table 1). The actually available ciphers and aliases depends on the used openssl version. Newer openssl versions may include additional ciphers.
Tag | Description |
---|---|
Key Exchange Algorithm: | |
kRSA | RSA key exchange |
kDHr | Diffie-Hellman key exchange with RSA key |
kDHd | Diffie-Hellman key exchange with DSA key |
kEDH | Ephemeral (temp.key) Diffie-Hellman key exchange (no cert) |
kSRP | Secure Remote Password (SRP) key exchange |
Authentication Algorithm: | |
aNULL | No authentication |
aRSA | RSA authentication |
aDSS | DSS authentication |
aDH | Diffie-Hellman authentication |
Cipher Encoding Algorithm: | |
eNULL | No encryption |
NULL | alias for eNULL |
AES | AES encryption |
DES | DES encryption |
3DES | Triple-DES encryption |
RC4 | RC4 encryption |
RC2 | RC2 encryption |
IDEA | IDEA encryption |
MAC Digest Algorithm: | |
MD5 | MD5 hash function |
SHA1 | SHA1 hash function |
SHA | alias for SHA1 |
SHA256 | SHA256 hash function |
SHA384 | SHA384 hash function |
Aliases: | |
SSLv3 | all SSL version 3.0 ciphers |
TLSv1 | all TLS version 1.0 ciphers |
EXP | all export ciphers |
EXPORT40 | all 40-bit export ciphers only |
EXPORT56 | all 56-bit export ciphers only |
LOW | all low strength ciphers (no export, single DES) |
MEDIUM | all ciphers with 128 bit encryption |
HIGH | all ciphers using Triple-DES |
RSA | all ciphers using RSA key exchange |
DH | all ciphers using Diffie-Hellman key exchange |
EDH | all ciphers using Ephemeral Diffie-Hellman key exchange |
ECDH | Elliptic Curve Diffie-Hellman key exchange |
ADH | all ciphers using Anonymous Diffie-Hellman key exchange |
AECDH | all ciphers using Anonymous Elliptic Curve Diffie-Hellman key exchange |
SRP | all ciphers using Secure Remote Password (SRP) key exchange |
DSS | all ciphers using DSS authentication |
ECDSA | all ciphers using ECDSA authentication |
aNULL | all ciphers using no authentication |
Now where this becomes interesting is that these can be put together to specify the order and ciphers you wish to use. To speed this up there are also aliases (SSLv3, TLSv1, EXP, LOW, MEDIUM, HIGH
) for certain groups of ciphers. These tags can be joined together with prefixes to form the cipher-spec. Available prefixes are:
- none: add cipher to list
-
+
: move matching ciphers to the current location in list -
-
: remove cipher from list (can be added later again) -
!
: kill cipher from list completely (can not be added later again)
aNULL
, eNULL
and EXP
ciphers are always disabled
Beginning with version 2.4.7, null and export-grade ciphers are always disabled, as mod_ssl unconditionally adds !aNULL:!eNULL:!EXP
to any cipher string at initialization.
A simpler way to look at all of this is to use the ``openssl ciphers -v
'' command which provides a nice way to successively create the correct cipher-spec string. The default cipher-spec string depends on the version of the OpenSSL libraries used. Let's suppose it is ``RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
'' which means the following: Put RC4-SHA
and AES128-SHA
at the beginning. We do this, because these ciphers offer a good compromise between speed and security. Next, include high and medium security ciphers. Finally, remove all ciphers which do not authenticate, i.e. for SSL the Anonymous Diffie-Hellman ciphers, as well as all ciphers which use MD5
as hash algorithm, because it has been proven insufficient.
$ openssl ciphers -v 'RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5' RC4-SHA SSLv3 Kx=RSA Au=RSA Enc=RC4(128) Mac=SHA1 AES128-SHA SSLv3 Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 DHE-RSA-AES256-SHA SSLv3 Kx=DH Au=RSA Enc=AES(256) Mac=SHA1 ... ... ... ... ... SEED-SHA SSLv3 Kx=RSA Au=RSA Enc=SEED(128) Mac=SHA1 PSK-RC4-SHA SSLv3 Kx=PSK Au=PSK Enc=RC4(128) Mac=SHA1 KRB5-RC4-SHA SSLv3 Kx=KRB5 Au=KRB5 Enc=RC4(128) Mac=SHA1
The complete list of particular RSA & DH ciphers for SSL is given in Table 2.
Example
SSLCipherSuite RSA:!EXP:!NULL:+HIGH:+MEDIUM:-LOW
Cipher-Tag | Protocol | Key Ex. | Auth. | Enc. | MAC | Type |
---|---|---|---|---|---|---|
RSA Ciphers: | ||||||
DES-CBC3-SHA | SSLv3 | RSA | RSA | 3DES(168) | SHA1 | |
IDEA-CBC-SHA | SSLv3 | RSA | RSA | IDEA(128) | SHA1 | |
RC4-SHA | SSLv3 | RSA | RSA | RC4(128) | SHA1 | |
RC4-MD5 | SSLv3 | RSA | RSA | RC4(128) | MD5 | |
DES-CBC-SHA | SSLv3 | RSA | RSA | DES(56) | SHA1 | |
EXP-DES-CBC-SHA | SSLv3 | RSA(512) | RSA | DES(40) | SHA1 | export |
EXP-RC2-CBC-MD5 | SSLv3 | RSA(512) | RSA | RC2(40) | MD5 | export |
EXP-RC4-MD5 | SSLv3 | RSA(512) | RSA | RC4(40) | MD5 | export |
NULL-SHA | SSLv3 | RSA | RSA | None | SHA1 | |
NULL-MD5 | SSLv3 | RSA | RSA | None | MD5 | |
Diffie-Hellman Ciphers: | ||||||
ADH-DES-CBC3-SHA | SSLv3 | DH | None | 3DES(168) | SHA1 | |
ADH-DES-CBC-SHA | SSLv3 | DH | None | DES(56) | SHA1 | |
ADH-RC4-MD5 | SSLv3 | DH | None | RC4(128) | MD5 | |
EDH-RSA-DES-CBC3-SHA | SSLv3 | DH | RSA | 3DES(168) | SHA1 | |
EDH-DSS-DES-CBC3-SHA | SSLv3 | DH | DSS | 3DES(168) | SHA1 | |
EDH-RSA-DES-CBC-SHA | SSLv3 | DH | RSA | DES(56) | SHA1 | |
EDH-DSS-DES-CBC-SHA | SSLv3 | DH | DSS | DES(56) | SHA1 | |
EXP-EDH-RSA-DES-CBC-SHA | SSLv3 | DH(512) | RSA | DES(40) | SHA1 | export |
EXP-EDH-DSS-DES-CBC-SHA | SSLv3 | DH(512) | DSS | DES(40) | SHA1 | export |
EXP-ADH-DES-CBC-SHA | SSLv3 | DH(512) | None | DES(40) | SHA1 | export |
EXP-ADH-RC4-MD5 | SSLv3 | DH(512) | None | RC4(40) | MD5 | export |
SSLCompression Directive
Description: | Enable compression on the SSL level |
---|---|
Syntax: | SSLCompression on|off |
Default: | SSLCompression off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.3 and later, if using OpenSSL 0.9.8 or later; virtual host scope available if using OpenSSL 1.0.0 or later. The default used to be on in version 2.4.3. |
This directive allows to enable compression on the SSL level.
Enabling compression causes security issues in most setups (the so called CRIME attack).
SSLCryptoDevice Directive
Description: | Enable use of a cryptographic hardware accelerator |
---|---|
Syntax: | SSLCryptoDevice engine |
Default: | SSLCryptoDevice builtin |
Context: | server config |
Status: | Extension |
Module: | mod_ssl |
This directive enables use of a cryptographic hardware accelerator board to offload some of the SSL processing overhead. This directive can only be used if the SSL toolkit is built with "engine" support; OpenSSL 0.9.7 and later releases have "engine" support by default, the separate "-engine" releases of OpenSSL 0.9.6 must be used.
To discover which engine names are supported, run the command "openssl engine
".
Example
# For a Broadcom accelerator: SSLCryptoDevice ubsec
SSLEngine Directive
Description: | SSL Engine Operation Switch |
---|---|
Syntax: | SSLEngine on|off|optional |
Default: | SSLEngine off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive toggles the usage of the SSL/TLS Protocol Engine. This is should be used inside a <VirtualHost>
section to enable SSL/TLS for a that virtual host. By default the SSL/TLS Protocol Engine is disabled for both the main server and all configured virtual hosts.
Example
<VirtualHost _default_:443> SSLEngine on #... </VirtualHost>
In Apache 2.1 and later, SSLEngine
can be set to optional
. This enables support for RFC 2817, Upgrading to TLS Within HTTP/1.1. At this time no web browsers support RFC 2817.
SSLFIPS Directive
Description: | SSL FIPS mode Switch |
---|---|
Syntax: | SSLFIPS on|off |
Default: | SSLFIPS off |
Context: | server config |
Status: | Extension |
Module: | mod_ssl |
This directive toggles the usage of the SSL library FIPS_mode flag. It must be set in the global server context and cannot be configured with conflicting settings (SSLFIPS on followed by SSLFIPS off or similar). The mode applies to all SSL library operations.
If httpd was compiled against an SSL library which did not support the FIPS_mode flag, SSLFIPS on
will fail. Refer to the FIPS 140-2 Security Policy document of the SSL provider library for specific requirements to use mod_ssl in a FIPS 140-2 approved mode of operation; note that mod_ssl itself is not validated, but may be described as using FIPS 140-2 validated cryptographic module, when all components are assembled and operated under the guidelines imposed by the applicable Security Policy.
SSLHonorCipherOrder Directive
Description: | Option to prefer the server's cipher preference order |
---|---|
Syntax: | SSLHonorCipherOrder on|off |
Default: | SSLHonorCipherOrder off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
When choosing a cipher during an SSLv3 or TLSv1 handshake, normally the client's preference is used. If this directive is enabled, the server's preference will be used instead.
Example
SSLHonorCipherOrder on
SSLInsecureRenegotiation Directive
Description: | Option to enable support for insecure renegotiation |
---|---|
Syntax: | SSLInsecureRenegotiation on|off |
Default: | SSLInsecureRenegotiation off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.2.15 and later, if using OpenSSL 0.9.8m or later |
As originally specified, all versions of the SSL and TLS protocols (up to and including TLS/1.2) were vulnerable to a Man-in-the-Middle attack (CVE-2009-3555) during a renegotiation. This vulnerability allowed an attacker to "prefix" a chosen plaintext to the HTTP request as seen by the web server. A protocol extension was developed which fixed this vulnerability if supported by both client and server.
If mod_ssl
is linked against OpenSSL version 0.9.8m or later, by default renegotiation is only supported with clients supporting the new protocol extension. If this directive is enabled, renegotiation will be allowed with old (unpatched) clients, albeit insecurely.
Security warning
If this directive is enabled, SSL connections will be vulnerable to the Man-in-the-Middle prefix attack as described in CVE-2009-3555.
Example
SSLInsecureRenegotiation on
The SSL_SECURE_RENEG
environment variable can be used from an SSI or CGI script to determine whether secure renegotiation is supported for a given SSL connection.
SSLOCSPDefaultResponder Directive
Description: | Set the default responder URI for OCSP validation |
---|---|
Syntax: | SSLOCSDefaultResponder uri |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This option sets the default OCSP responder to use. If SSLOCSPOverrideResponder
is not enabled, the URI given will be used only if no responder URI is specified in the certificate being verified.
SSLOCSPEnable Directive
Description: | Enable OCSP validation of the client certificate chain |
---|---|
Syntax: | SSLOCSPEnable on|off |
Default: | SSLOCSPEnable off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This option enables OCSP validation of the client certificate chain. If this option is enabled, certificates in the client's certificate chain will be validated against an OCSP responder after normal verification (including CRL checks) have taken place.
The OCSP responder used is either extracted from the certificate itself, or derived by configuration; see the SSLOCSPDefaultResponder
and SSLOCSPOverrideResponder
directives.
Example
SSLVerifyClient on SSLOCSPEnable on SSLOCSPDefaultResponder "http://responder.example.com:8888/responder" SSLOCSPOverrideResponder on
SSLOCSPOverrideResponder Directive
Description: | Force use of the default responder URI for OCSP validation |
---|---|
Syntax: | SSLOCSPOverrideResponder on|off |
Default: | SSLOCSPOverrideResponder off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This option forces the configured default OCSP responder to be used during OCSP certificate validation, regardless of whether the certificate being validated references an OCSP responder.
SSLOCSPProxyURL Directive
Description: | Proxy URL to use for OCSP requests |
---|---|
Syntax: | SSLOCSPProxyURL url |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.19 and later |
This option allows to set the URL of a HTTP proxy that should be used for all queries to OCSP responders.
SSLOCSPResponderTimeout Directive
Description: | Timeout for OCSP queries |
---|---|
Syntax: | SSLOCSPResponderTimeout seconds |
Default: | SSLOCSPResponderTimeout 10 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This option sets the timeout for queries to OCSP responders, when SSLOCSPEnable
is turned on.
SSLOCSPResponseMaxAge Directive
Description: | Maximum allowable age for OCSP responses |
---|---|
Syntax: | SSLOCSPResponseMaxAge seconds |
Default: | SSLOCSPResponseMaxAge -1 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This option sets the maximum allowable age ("freshness") for OCSP responses. The default value (-1
) does not enforce a maximum age, which means that OCSP responses are considered valid as long as their nextUpdate
field is in the future.
SSLOCSPResponseTimeSkew Directive
Description: | Maximum allowable time skew for OCSP response validation |
---|---|
Syntax: | SSLOCSPResponseTimeSkew seconds |
Default: | SSLOCSPResponseTimeSkew 300 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This option sets the maximum allowable time skew for OCSP responses (when checking their thisUpdate
and nextUpdate
fields).
SSLOCSPUseRequestNonce Directive
Description: | Use a nonce within OCSP queries |
---|---|
Syntax: | SSLOCSPUseRequestNonce on|off |
Default: | SSLOCSPUseRequestNonce on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.10 and later |
This option determines whether queries to OCSP responders should contain a nonce or not. By default, a query nonce is always used and checked against the response's one. When the responder does not use nonces (e.g. Microsoft OCSP Responder), this option should be turned off
.
SSLOpenSSLConfCmd Directive
Description: | Configure OpenSSL parameters through its SSL_CONF API |
---|---|
Syntax: | SSLOpenSSLConfCmd command-name command-value |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.8 and later, if using OpenSSL 1.0.2 or later |
This directive exposes OpenSSL's SSL_CONF API to mod_ssl, allowing a flexible configuration of OpenSSL parameters without the need of implementing additional mod_ssl
directives when new features are added to OpenSSL.
The set of available SSLOpenSSLConfCmd
commands depends on the OpenSSL version being used for mod_ssl
(at least version 1.0.2 is required). For a list of supported command names, see the section Supported configuration file commands in the SSL_CONF_cmd(3) manual page for OpenSSL.
Some of the SSLOpenSSLConfCmd
commands can be used as an alternative to existing directives (such as SSLCipherSuite
or SSLProtocol
), though it should be noted that the syntax / allowable values for the parameters may sometimes differ.
Examples
SSLOpenSSLConfCmd Options -SessionTicket,ServerPreference SSLOpenSSLConfCmd ECDHParameters brainpoolP256r1 SSLOpenSSLConfCmd ServerInfoFile "/usr/local/apache2/conf/server-info.pem" SSLOpenSSLConfCmd Protocol "-ALL, TLSv1.2" SSLOpenSSLConfCmd SignatureAlgorithms RSA+SHA384:ECDSA+SHA256
SSLOptions Directive
Description: | Configure various SSL engine run-time options |
---|---|
Syntax: | SSLOptions [+|-]option ... |
Context: | server config, virtual host, directory, .htaccess |
Override: | Options |
Status: | Extension |
Module: | mod_ssl |
This directive can be used to control various run-time options on a per-directory basis. Normally, if multiple SSLOptions
could apply to a directory, then the most specific one is taken completely; the options are not merged. However if all the options on the SSLOptions
directive are preceded by a plus (+
) or minus (-
) symbol, the options are merged. Any options preceded by a +
are added to the options currently in force, and any options preceded by a -
are removed from the options currently in force.
The available options are:
-
StdEnvVars
When this option is enabled, the standard set of SSL related CGI/SSI environment variables are created. This per default is disabled for performance reasons, because the information extraction step is a rather expensive operation. So one usually enables this option for CGI and SSI requests only.
-
ExportCertData
When this option is enabled, additional CGI/SSI environment variables are created:
SSL_SERVER_CERT
,SSL_CLIENT_CERT
andSSL_CLIENT_CERT_CHAIN_
n (with n = 0,1,2,..). These contain the PEM-encoded X.509 Certificates of server and client for the current HTTPS connection and can be used by CGI scripts for deeper Certificate checking. Additionally all other certificates of the client certificate chain are provided, too. This bloats up the environment a little bit which is why you have to use this option to enable it on demand. -
FakeBasicAuth
When this option is enabled, the Subject Distinguished Name (DN) of the Client X509 Certificate is translated into a HTTP Basic Authorization username. This means that the standard Apache authentication methods can be used for access control. The user name is just the Subject of the Client's X509 Certificate (can be determined by running OpenSSL's
openssl x509
command:openssl x509 -noout -subject -in
certificate.crt
). Note that no password is obtained from the user. Every entry in the user file needs this password: ``xxj31ZMTZzkVA
'', which is the DES-encrypted version of the word `password
''. Those who live under MD5-based encryption (for instance under FreeBSD or BSD/OS, etc.) should use the following MD5 hash of the same word: ``$1$OXLyS...$Owx8s2/m9/gfkcRVXzgoE/
''.Note that the
AuthBasicFake
directive withinmod_auth_basic
can be used as a more general mechanism for faking basic authentication, giving control over the structure of both the username and password. -
StrictRequire
This forces forbidden access when
SSLRequireSSL
orSSLRequire
successfully decided that access should be forbidden. Usually the default is that in the case where a ``Satisfy any
'' directive is used, and other access restrictions are passed, denial of access due toSSLRequireSSL
orSSLRequire
is overridden (because that's how the ApacheSatisfy
mechanism should work.) But for strict access restriction you can useSSLRequireSSL
and/orSSLRequire
in combination with an ``SSLOptions +StrictRequire
''. Then an additional ``Satisfy Any
'' has no chance once mod_ssl has decided to deny access. -
OptRenegotiate
This enables optimized SSL connection renegotiation handling when SSL directives are used in per-directory context. By default a strict scheme is enabled where every per-directory reconfiguration of SSL parameters causes a full SSL renegotiation handshake. When this option is used mod_ssl tries to avoid unnecessary handshakes by doing more granular (but still safe) parameter checks. Nevertheless these granular checks sometimes may not be what the user expects, so enable this on a per-directory basis only, please.
-
LegacyDNStringFormat
This option influences how values of the
SSL_{CLIENT,SERVER}_{I,S}_DN
variables are formatted. Since version 2.3.11, Apache HTTPD uses a RFC 2253 compatible format by default. This uses commas as delimiters between the attributes, allows the use of non-ASCII characters (which are converted to UTF8), escapes various special characters with backslashes, and sorts the attributes with the "C" attribute last.If
LegacyDNStringFormat
is set, the old format will be used which sorts the "C" attribute first, uses slashes as separators, and does not handle non-ASCII and special characters in any consistent way.
Example
SSLOptions +FakeBasicAuth -StrictRequire <Files ~ "\.(cgi|shtml)$"> SSLOptions +StdEnvVars -ExportCertData </Files>
SSLPassPhraseDialog Directive
Description: | Type of pass phrase dialog for encrypted private keys |
---|---|
Syntax: | SSLPassPhraseDialog type |
Default: | SSLPassPhraseDialog builtin |
Context: | server config |
Status: | Extension |
Module: | mod_ssl |
When Apache starts up it has to read the various Certificate (see SSLCertificateFile
) and Private Key (see SSLCertificateKeyFile
) files of the SSL-enabled virtual servers. Because for security reasons the Private Key files are usually encrypted, mod_ssl needs to query the administrator for a Pass Phrase in order to decrypt those files. This query can be done in two ways which can be configured by type:
-
builtin
This is the default where an interactive terminal dialog occurs at startup time just before Apache detaches from the terminal. Here the administrator has to manually enter the Pass Phrase for each encrypted Private Key file. Because a lot of SSL-enabled virtual hosts can be configured, the following reuse-scheme is used to minimize the dialog: When a Private Key file is encrypted, all known Pass Phrases (at the beginning there are none, of course) are tried. If one of those known Pass Phrases succeeds no dialog pops up for this particular Private Key file. If none succeeded, another Pass Phrase is queried on the terminal and remembered for the next round (where it perhaps can be reused).
This scheme allows mod_ssl to be maximally flexible (because for N encrypted Private Key files you can use N different Pass Phrases - but then you have to enter all of them, of course) while minimizing the terminal dialog (i.e. when you use a single Pass Phrase for all N Private Key files this Pass Phrase is queried only once).
-
|/path/to/program [args...]
This mode allows an external program to be used which acts as a pipe to a particular input device; the program is sent the standard prompt text used for the
builtin
mode onstdin
, and is expected to write password strings onstdout
. If several passwords are needed (or an incorrect password is entered), additional prompt text will be written subsequent to the first password being returned, and more passwords must then be written back. -
exec:/path/to/program
Here an external program is configured which is called at startup for each encrypted Private Key file. It is called with two arguments (the first is of the form ``
servername:portnumber
'', the second is either ``RSA
'', ``DSA
'', ``ECC
'' or an integer index starting at 3 if more than three keys are configured), which indicate for which server and algorithm it has to print the corresponding Pass Phrase tostdout
. In versions 2.4.8 (unreleased) and 2.4.9, it is called with one argument, a string of the form ``servername:portnumber:index
'' (withindex
being a zero-based integer number), which indicate the server, TCP port and certificate number. The intent is that this external program first runs security checks to make sure that the system is not compromised by an attacker, and only when these checks were passed successfully it provides the Pass Phrase.Both these security checks, and the way the Pass Phrase is determined, can be as complex as you like. Mod_ssl just defines the interface: an executable program which provides the Pass Phrase on
stdout
. Nothing more or less! So, if you're really paranoid about security, here is your interface. Anything else has to be left as an exercise to the administrator, because local security requirements are so different.The reuse-algorithm above is used here, too. In other words: The external program is called only once per unique Pass Phrase.
Example
SSLPassPhraseDialog "exec:/usr/local/apache/sbin/pp-filter"
SSLProtocol Directive
Description: | Configure usable SSL/TLS protocol versions |
---|---|
Syntax: | SSLProtocol [+|-]protocol ... |
Default: | SSLProtocol all -SSLv3 (up to 2.4.16: all) |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive can be used to control which versions of the SSL/TLS protocol will be accepted in new connections.
The available (case-insensitive) protocols are:
-
SSLv3
This is the Secure Sockets Layer (SSL) protocol, version 3.0, from the Netscape Corporation. It is the successor to SSLv2 and the predecessor to TLSv1, but is deprecated in RFC 7568.
-
TLSv1
This is the Transport Layer Security (TLS) protocol, version 1.0. It is the successor to SSLv3 and is defined in RFC 2246. It is supported by nearly every client.
-
TLSv1.1
(when using OpenSSL 1.0.1 and later)A revision of the TLS 1.0 protocol, as defined in RFC 4346.
-
TLSv1.2
(when using OpenSSL 1.0.1 and later)A revision of the TLS 1.1 protocol, as defined in RFC 5246.
-
all
This is a shortcut for ``
+SSLv3 +TLSv1
'' or - when using OpenSSL 1.0.1 and later - ``+SSLv3 +TLSv1 +TLSv1.1 +TLSv1.2
'', respectively (except for OpenSSL versions compiled with the ``no-ssl3'' configuration option, whereall
does not include+SSLv3
).
Example
SSLProtocol TLSv1
SSLProxyCACertificateFile Directive
Description: | File of concatenated PEM-encoded CA Certificates for Remote Server Auth |
---|---|
Syntax: | SSLProxyCACertificateFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the all-in-one file where you can assemble the Certificates of Certification Authorities (CA) whose remote servers you deal with. These are used for Remote Server Authentication. Such a file is simply the concatenation of the various PEM-encoded Certificate files, in order of preference. This can be used alternatively and/or additionally to SSLProxyCACertificatePath
.
Example
SSLProxyCACertificateFile "/usr/local/apache2/conf/ssl.crt/ca-bundle-remote-server.crt"
SSLProxyCACertificatePath Directive
Description: | Directory of PEM-encoded CA Certificates for Remote Server Auth |
---|---|
Syntax: | SSLProxyCACertificatePath directory-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the directory where you keep the Certificates of Certification Authorities (CAs) whose remote servers you deal with. These are used to verify the remote server certificate on Remote Server Authentication.
The files in this directory have to be PEM-encoded and are accessed through hash filenames. So usually you can't just place the Certificate files there: you also have to create symbolic links named hash-value.N
. And you should always make sure this directory contains the appropriate symbolic links.
Example
SSLProxyCACertificatePath "/usr/local/apache2/conf/ssl.crt/"
SSLProxyCARevocationCheck Directive
Description: | Enable CRL-based revocation checking for Remote Server Auth |
---|---|
Syntax: | SSLProxyCARevocationCheck chain|leaf|none |
Default: | SSLProxyCARevocationCheck none |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Enables certificate revocation list (CRL) checking for the remote servers you deal with. At least one of SSLProxyCARevocationFile
or SSLProxyCARevocationPath
must be configured. When set to chain
(recommended setting), CRL checks are applied to all certificates in the chain, while setting it to leaf
limits the checks to the end-entity cert.
When set to chain
or leaf
, CRLs must be available for successful validation
Prior to version 2.3.15, CRL checking in mod_ssl also succeeded when no CRL(s) were found in any of the locations configured with SSLProxyCARevocationFile
or SSLProxyCARevocationPath
. With the introduction of this directive, the behavior has been changed: when checking is enabled, CRLs must be present for the validation to succeed - otherwise it will fail with an "unable to get certificate CRL"
error.
Example
SSLProxyCARevocationCheck chain
SSLProxyCARevocationFile Directive
Description: | File of concatenated PEM-encoded CA CRLs for Remote Server Auth |
---|---|
Syntax: | SSLProxyCARevocationFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the all-in-one file where you can assemble the Certificate Revocation Lists (CRL) of Certification Authorities (CA) whose remote servers you deal with. These are used for Remote Server Authentication. Such a file is simply the concatenation of the various PEM-encoded CRL files, in order of preference. This can be used alternatively and/or additionally to SSLProxyCARevocationPath
.
Example
SSLProxyCARevocationFile "/usr/local/apache2/conf/ssl.crl/ca-bundle-remote-server.crl"
SSLProxyCARevocationPath Directive
Description: | Directory of PEM-encoded CA CRLs for Remote Server Auth |
---|---|
Syntax: | SSLProxyCARevocationPath directory-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets the directory where you keep the Certificate Revocation Lists (CRL) of Certification Authorities (CAs) whose remote servers you deal with. These are used to revoke the remote server certificate on Remote Server Authentication.
The files in this directory have to be PEM-encoded and are accessed through hash filenames. So usually you have not only to place the CRL files there. Additionally you have to create symbolic links named hash-value.rN
. And you should always make sure this directory contains the appropriate symbolic links.
Example
SSLProxyCARevocationPath "/usr/local/apache2/conf/ssl.crl/"
SSLProxyCheckPeerCN Directive
Description: | Whether to check the remote server certificate's CN field |
---|---|
Syntax: | SSLProxyCheckPeerCN on|off |
Default: | SSLProxyCheckPeerCN on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets whether the remote server certificate's CN field is compared against the hostname of the request URL. If both are not equal a 502 status code (Bad Gateway) is sent. SSLProxyCheckPeerCN
is superseded by SSLProxyCheckPeerName
in release 2.4.5 and later.
In all releases 2.4.5 through 2.4.20, setting SSLProxyCheckPeerName off
was sufficient to enable this behavior (as the SSLProxyCheckPeerCN
default was on
.) In these releases, both directives must be set to off
to completely avoid remote server certificate name validation. Many users reported this to be very confusing.
As of release 2.4.21, all configurations which enable either one of the SSLProxyCheckPeerName
or SSLProxyCheckPeerCN
options will use the new SSLProxyCheckPeerName
behavior, and all configurations which disable either one of the SSLProxyCheckPeerName
or SSLProxyCheckPeerCN
options will suppress all remote server certificate name validation. Only the following configuration will trigger the legacy certificate CN comparison in 2.4.21 and later releases;
Example
SSLProxyCheckPeerCN on SSLProxyCheckPeerName off
SSLProxyCheckPeerExpire Directive
Description: | Whether to check if remote server certificate is expired |
---|---|
Syntax: | SSLProxyCheckPeerExpire on|off |
Default: | SSLProxyCheckPeerExpire on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets whether it is checked if the remote server certificate is expired or not. If the check fails a 502 status code (Bad Gateway) is sent.
Example
SSLProxyCheckPeerExpire on
SSLProxyCheckPeerName Directive
Description: | Configure host name checking for remote server certificates |
---|---|
Syntax: | SSLProxyCheckPeerName on|off |
Default: | SSLProxyCheckPeerName on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Apache HTTP Server 2.4.5 and later |
This directive configures host name checking for server certificates when mod_ssl is acting as an SSL client. The check will succeed if the host name from the request URI matches one of the CN attribute(s) of the certificate's subject, or matches the subjectAltName extension. If the check fails, the SSL request is aborted and a 502 status code (Bad Gateway) is returned.
Wildcard matching is supported for specific cases: an subjectAltName entry of type dNSName, or CN attributes starting with *.
will match with any host name of the same number of name elements and the same suffix. E.g. *.example.org
will match foo.example.org
, but will not match foo.bar.example.org
, because the number of elements in the respective host names differs.
This feature was introduced in 2.4.5 and superseded the behavior of the SSLProxyCheckPeerCN
directive, which only tested the exact value in the first CN attribute against the host name. However, many users were confused by the behavior of using these directives individually, so the mutual behavior of SSLProxyCheckPeerName
and SSLProxyCheckPeerCN
directives were improved in release 2.4.21. See the SSLProxyCheckPeerCN
directive description for the original behavior and details of these improvements.
SSLProxyCipherSuite Directive
Description: | Cipher Suite available for negotiation in SSL proxy handshake |
---|---|
Syntax: | SSLProxyCipherSuite cipher-spec |
Default: | SSLProxyCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+EXP |
Context: | server config, virtual host, directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
Equivalent to SSLCipherSuite
, but for the proxy connection. Please refer to SSLCipherSuite
for additional information.
SSLProxyEngine Directive
Description: | SSL Proxy Engine Operation Switch |
---|---|
Syntax: | SSLProxyEngine on|off |
Default: | SSLProxyEngine off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive toggles the usage of the SSL/TLS Protocol Engine for proxy. This is usually used inside a <VirtualHost>
section to enable SSL/TLS for proxy usage in a particular virtual host. By default the SSL/TLS Protocol Engine is disabled for proxy both for the main server and all configured virtual hosts.
Note that the SSLProxyEngine
directive should not, in general, be included in a virtual host that will be acting as a forward proxy (using <Proxy>
or ProxyRequests
directives). SSLProxyEngine
is not required to enable a forward proxy server to proxy SSL/TLS requests.
Example
<VirtualHost _default_:443> SSLProxyEngine on #... </VirtualHost>
SSLProxyMachineCertificateChainFile Directive
Description: | File of concatenated PEM-encoded CA certificates to be used by the proxy for choosing a certificate |
---|---|
Syntax: | SSLProxyMachineCertificateChainFile filename |
Context: | server config |
Override: | Not applicable |
Status: | Extension |
Module: | mod_ssl |
This directive sets the all-in-one file where you keep the certificate chain for all of the client certs in use. This directive will be needed if the remote server presents a list of CA certificates that are not direct signers of one of the configured client certificates.
This referenced file is simply the concatenation of the various PEM-encoded certificate files. Upon startup, each client certificate configured will be examined and a chain of trust will be constructed.
Security warning
If this directive is enabled, all of the certificates in the file will be trusted as if they were also in SSLProxyCACertificateFile
.
Example
SSLProxyMachineCertificateChainFile "/usr/local/apache2/conf/ssl.crt/proxyCA.pem"
SSLProxyMachineCertificateFile Directive
Description: | File of concatenated PEM-encoded client certificates and keys to be used by the proxy |
---|---|
Syntax: | SSLProxyMachineCertificateFile filename |
Context: | server config |
Override: | Not applicable |
Status: | Extension |
Module: | mod_ssl |
This directive sets the all-in-one file where you keep the certificates and keys used for authentication of the proxy server to remote servers.
This referenced file is simply the concatenation of the various PEM-encoded certificate files, in order of preference. Use this directive alternatively or additionally to SSLProxyMachineCertificatePath
.
Currently there is no support for encrypted private keys
Example
SSLProxyMachineCertificateFile "/usr/local/apache2/conf/ssl.crt/proxy.pem"
SSLProxyMachineCertificatePath Directive
Description: | Directory of PEM-encoded client certificates and keys to be used by the proxy |
---|---|
Syntax: | SSLProxyMachineCertificatePath directory |
Context: | server config |
Override: | Not applicable |
Status: | Extension |
Module: | mod_ssl |
This directive sets the directory where you keep the certificates and keys used for authentication of the proxy server to remote servers.
The files in this directory must be PEM-encoded and are accessed through hash filenames. Additionally, you must create symbolic links named hash-value.N
. And you should always make sure this directory contains the appropriate symbolic links.
Currently there is no support for encrypted private keys
Example
SSLProxyMachineCertificatePath "/usr/local/apache2/conf/proxy.crt/"
SSLProxyProtocol Directive
Description: | Configure usable SSL protocol flavors for proxy usage |
---|---|
Syntax: | SSLProxyProtocol [+|-]protocol ... |
Default: | SSLProxyProtocol all -SSLv3 (up to 2.4.16: all) |
Context: | server config, virtual host |
Override: | Options |
Status: | Extension |
Module: | mod_ssl |
This directive can be used to control the SSL protocol flavors mod_ssl should use when establishing its server environment for proxy . It will only connect to servers using one of the provided protocols.
Please refer to SSLProtocol
for additional information.
SSLProxyVerify Directive
Description: | Type of remote server Certificate verification |
---|---|
Syntax: | SSLProxyVerify level |
Default: | SSLProxyVerify none |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
When a proxy is configured to forward requests to a remote SSL server, this directive can be used to configure certificate verification of the remote server.
The following levels are available for level:
- none: no remote server Certificate is required at all
- optional: the remote server may present a valid Certificate
- require: the remote server has to present a valid Certificate
-
optional_no_ca: the remote server may present a valid Certificate
but it need not to be (successfully) verifiable.
In practice only levels none and require are really interesting, because level optional doesn't work with all servers and level optional_no_ca is actually against the idea of authentication (but can be used to establish SSL test pages, etc.)
Example
SSLProxyVerify require
SSLProxyVerifyDepth Directive
Description: | Maximum depth of CA Certificates in Remote Server Certificate verification |
---|---|
Syntax: | SSLProxyVerifyDepth number |
Default: | SSLProxyVerifyDepth 1 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
This directive sets how deeply mod_ssl should verify before deciding that the remote server does not have a valid certificate.
The depth actually is the maximum number of intermediate certificate issuers, i.e. the number of CA certificates which are max allowed to be followed while verifying the remote server certificate. A depth of 0 means that self-signed remote server certificates are accepted only, the default depth of 1 means the remote server certificate can be self-signed or has to be signed by a CA which is directly known to the server (i.e. the CA's certificate is under SSLProxyCACertificatePath
), etc.
Example
SSLProxyVerifyDepth 10
SSLRandomSeed Directive
Description: | Pseudo Random Number Generator (PRNG) seeding source |
---|---|
Syntax: | SSLRandomSeed context source [bytes] |
Context: | server config |
Status: | Extension |
Module: | mod_ssl |
This configures one or more sources for seeding the Pseudo Random Number Generator (PRNG) in OpenSSL at startup time (context is startup
) and/or just before a new SSL connection is established (context is connect
). This directive can only be used in the global server context because the PRNG is a global facility.
The following source variants are available:
-
builtin
This is the always available builtin seeding source. Its usage consumes minimum CPU cycles under runtime and hence can be always used without drawbacks. The source used for seeding the PRNG contains of the current time, the current process id and (when applicable) a randomly chosen 1KB extract of the inter-process scoreboard structure of Apache. The drawback is that this is not really a strong source and at startup time (where the scoreboard is still not available) this source just produces a few bytes of entropy. So you should always, at least for the startup, use an additional seeding source.
-
file:/path/to/source
This variant uses an external file
/path/to/source
as the source for seeding the PRNG. When bytes is specified, only the first bytes number of bytes of the file form the entropy (and bytes is given to/path/to/source
as the first argument). When bytes is not specified the whole file forms the entropy (and0
is given to/path/to/source
as the first argument). Use this especially at startup time, for instance with an available/dev/random
and/or/dev/urandom
devices (which usually exist on modern Unix derivatives like FreeBSD and Linux).But be careful: Usually
/dev/random
provides only as much entropy data as it actually has, i.e. when you request 512 bytes of entropy, but the device currently has only 100 bytes available two things can happen: On some platforms you receive only the 100 bytes while on other platforms the read blocks until enough bytes are available (which can take a long time). Here using an existing/dev/urandom
is better, because it never blocks and actually gives the amount of requested data. The drawback is just that the quality of the received data may not be the best. -
exec:/path/to/program
This variant uses an external executable
/path/to/program
as the source for seeding the PRNG. When bytes is specified, only the first bytes number of bytes of itsstdout
contents form the entropy. When bytes is not specified, the entirety of the data produced onstdout
form the entropy. Use this only at startup time when you need a very strong seeding with the help of an external program (for instance as in the example above with thetruerand
utility you can find in the mod_ssl distribution which is based on the AT&T truerand library). Using this in the connection context slows down the server too dramatically, of course. So usually you should avoid using external programs in that context. -
egd:/path/to/egd-socket
(Unix only)This variant uses the Unix domain socket of the external Entropy Gathering Daemon (EGD) (see http://www.lothar.com/tech /crypto/) to seed the PRNG. Use this if no random device exists on your platform.
Example
SSLRandomSeed startup builtin SSLRandomSeed startup "file:/dev/random" SSLRandomSeed startup "file:/dev/urandom" 1024 SSLRandomSeed startup "exec:/usr/local/bin/truerand" 16 SSLRandomSeed connect builtin SSLRandomSeed connect "file:/dev/random" SSLRandomSeed connect "file:/dev/urandom" 1024
SSLRenegBufferSize Directive
Description: | Set the size for the SSL renegotiation buffer |
---|---|
Syntax: | SSLRenegBufferSize bytes |
Default: | SSLRenegBufferSize 131072 |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
If an SSL renegotiation is required in per-location context, for example, any use of SSLVerifyClient
in a Directory or Location block, then mod_ssl
must buffer any HTTP request body into memory until the new SSL handshake can be performed. This directive can be used to set the amount of memory that will be used for this buffer.
Note that in many configurations, the client sending the request body will be untrusted so a denial of service attack by consumption of memory must be considered when changing this configuration setting.
Example
SSLRenegBufferSize 262144
SSLRequire Directive
Description: | Allow access only when an arbitrarily complex boolean expression is true |
---|---|
Syntax: | SSLRequire expression |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
SSLRequire is deprecated
SSLRequire
is deprecated and should in general be replaced by Require expr. The so called ap_expr syntax of Require expr
is a superset of the syntax of SSLRequire
, with the following exception:
In SSLRequire
, the comparison operators <
, <=
, ... are completely equivalent to the operators lt
, le
, ... and work in a somewhat peculiar way that first compares the length of two strings and then the lexical order. On the other hand, ap_expr has two sets of comparison operators: The operators <
, <=
, ... do lexical string comparison, while the operators -lt
, -le
, ... do integer comparison. For the latter, there are also aliases without the leading dashes: lt
, le
, ...
This directive specifies a general access requirement which has to be fulfilled in order to allow access. It is a very powerful directive because the requirement specification is an arbitrarily complex boolean expression containing any number of access checks.
The expression must match the following syntax (given as a BNF grammar notation):
expr ::= "true" | "false" | "!" expr | expr "&&" expr | expr "||" expr | "(" expr ")" | comp comp ::= word "==" word | word "eq" word | word "!=" word | word "ne" word | word "<" word | word "lt" word | word "<=" word | word "le" word | word ">" word | word "gt" word | word ">=" word | word "ge" word | word "in" "{" wordlist "}" | word "in" "PeerExtList(" word ")" | word "=~" regex | word "!~" regex wordlist ::= word | wordlist "," word word ::= digit | cstring | variable | function digit ::= [0-9]+ cstring ::= "..." variable ::= "%{" varname "}" function ::= funcname "(" funcargs ")"
For varname
any of the variables described in Environment Variables can be used. For funcname
the available functions are listed in the ap_expr documentation.
The expression is parsed into an internal machine representation when the configuration is loaded, and then evaluated during request processing. In .htaccess context, the expression is both parsed and executed each time the .htaccess file is encountered during request processing.
Example
SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \ and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ and %{TIME_WDAY} -ge 1 and %{TIME_WDAY} -le 5 \ and %{TIME_HOUR} -ge 8 and %{TIME_HOUR} -le 20 ) \ or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
The PeerExtList(object-ID)
function expects to find zero or more instances of the X.509 certificate extension identified by the given object ID (OID) in the client certificate. The expression evaluates to true if the left-hand side string matches exactly against the value of an extension identified with this OID. (If multiple extensions with the same OID are present, at least one extension must match).
Example
SSLRequire "foobar" in PeerExtList("1.2.3.4.5.6")
Notes on the PeerExtList function
The object ID can be specified either as a descriptive name recognized by the SSL library, such as
"nsComment"
, or as a numeric OID, such as"1.2.3.4.5.6"
.Expressions with types known to the SSL library are rendered to a string before comparison. For an extension with a type not recognized by the SSL library, mod_ssl will parse the value if it is one of the primitive ASN.1 types UTF8String, IA5String, VisibleString, or BMPString. For an extension of one of these types, the string value will be converted to UTF-8 if necessary, then compared against the left-hand-side expression.
See also
- Environment Variables in Apache HTTP Server, for additional examples.
- Require expr
- Generic expression syntax in Apache HTTP Server
SSLRequireSSL Directive
Description: | Deny access when SSL is not used for the HTTP request |
---|---|
Syntax: | SSLRequireSSL |
Context: | directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
This directive forbids access unless HTTP over SSL (i.e. HTTPS) is enabled for the current connection. This is very handy inside the SSL-enabled virtual host or directories for defending against configuration errors that expose stuff that should be protected. When this directive is present all requests are denied which are not using SSL.
Example
SSLRequireSSL
SSLSessionCache Directive
Description: | Type of the global/inter-process SSL Session Cache |
---|---|
Syntax: | SSLSessionCache type |
Default: | SSLSessionCache none |
Context: | server config |
Status: | Extension |
Module: | mod_ssl |
This configures the storage type of the global/inter-process SSL Session Cache. This cache is an optional facility which speeds up parallel request processing. For requests to the same server process (via HTTP keep-alive), OpenSSL already caches the SSL session information locally. But because modern clients request inlined images and other data via parallel requests (usually up to four parallel requests are common) those requests are served by different pre-forked server processes. Here an inter-process cache helps to avoid unnecessary session handshakes.
The following five storage types are currently supported:
-
none
This disables the global/inter-process Session Cache. This will incur a noticeable speed penalty and may cause problems if using certain browsers, particularly if client certificates are enabled. This setting is not recommended.
-
nonenotnull
This disables any global/inter-process Session Cache. However it does force OpenSSL to send a non-null session ID to accommodate buggy clients that require one.
-
dbm:/path/to/datafile
This makes use of a DBM hashfile on the local disk to synchronize the local OpenSSL memory caches of the server processes. This session cache may suffer reliability issues under high load. To use this, ensure that
mod_socache_dbm
is loaded. -
shmcb:/path/to/datafile
[(
size)
]This makes use of a high-performance cyclic buffer (approx. size bytes in size) inside a shared memory segment in RAM (established via
/path/to/datafile
) to synchronize the local OpenSSL memory caches of the server processes. This is the recommended session cache. To use this, ensure thatmod_socache_shmcb
is loaded. -
dc:UNIX:/path/to/socket
This makes use of the distcache distributed session caching libraries. The argument should specify the location of the server or proxy to be used using the distcache address syntax; for example,
UNIX:/path/to/socket
specifies a UNIX domain socket (typically a local dc_client proxy);IP:server.example.com:9001
specifies an IP address. To use this, ensure thatmod_socache_dc
is loaded.
Examples
SSLSessionCache "dbm:/usr/local/apache/logs/ssl_gcache_data" SSLSessionCache "shmcb:/usr/local/apache/logs/ssl_gcache_data(512000)"
The ssl-cache
mutex is used to serialize access to the session cache to prevent corruption. This mutex can be configured using the Mutex
directive.
SSLSessionCacheTimeout Directive
Description: | Number of seconds before an SSL session expires in the Session Cache |
---|---|
Syntax: | SSLSessionCacheTimeout seconds |
Default: | SSLSessionCacheTimeout 300 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Applies also to RFC 5077 TLS session resumption in Apache 2.4.10 and later |
This directive sets the timeout in seconds for the information stored in the global/inter-process SSL Session Cache, the OpenSSL internal memory cache and for sessions resumed by TLS session resumption (RFC 5077). It can be set as low as 15 for testing, but should be set to higher values like 300 in real life.
Example
SSLSessionCacheTimeout 600
SSLSessionTicketKeyFile Directive
Description: | Persistent encryption/decryption key for TLS session tickets |
---|---|
Syntax: | SSLSessionTicketKeyFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.0 and later, if using OpenSSL 0.9.8h or later |
Optionally configures a secret key for encrypting and decrypting TLS session tickets, as defined in RFC 5077. Primarily suitable for clustered environments where TLS sessions information should be shared between multiple nodes. For single-instance httpd setups, it is recommended to not configure a ticket key file, but to rely on (random) keys generated by mod_ssl at startup, instead.
The ticket key file must contain 48 bytes of random data, preferrably created from a high-entropy source. On a Unix-based system, a ticket key file can be created as follows:
dd if=/dev/random of=/path/to/file.tkey bs=1 count=48
Ticket keys should be rotated (replaced) on a frequent basis, as this is the only way to invalidate an existing session ticket - OpenSSL currently doesn't allow to specify a limit for ticket lifetimes. A new ticket key only gets used after restarting the web server. All existing session tickets become invalid after a restart.
The ticket key file contains sensitive keying material and should be protected with file permissions similar to those used for SSLCertificateKeyFile
.
SSLSessionTickets Directive
Description: | Enable or disable use of TLS session tickets |
---|---|
Syntax: | SSLSessionTickets on|off |
Default: | SSLSessionTickets on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.11 and later, if using OpenSSL 0.9.8f or later. |
This directive allows to enable or disable the use of TLS session tickets (RFC 5077).
TLS session tickets are enabled by default. Using them without restarting the web server with an appropriate frequency (e.g. daily) compromises perfect forward secrecy.
SSLSRPUnknownUserSeed Directive
Description: | SRP unknown user seed |
---|---|
Syntax: | SSLSRPUnknownUserSeed secret-string |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.4 and later, if using OpenSSL 1.0.1 or later |
This directive sets the seed used to fake SRP user parameters for unknown users, to avoid leaking whether a given user exists. Specify a secret string. If this directive is not used, then Apache will return the UNKNOWN_PSK_IDENTITY alert to clients who specify an unknown username.
Example
SSLSRPUnknownUserSeed "secret"
SSLSRPVerifierFile Directive
Description: | Path to SRP verifier file |
---|---|
Syntax: | SSLSRPVerifierFile file-path |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in httpd 2.4.4 and later, if using OpenSSL 1.0.1 or later |
This directive enables TLS-SRP and sets the path to the OpenSSL SRP (Secure Remote Password) verifier file containing TLS-SRP usernames, verifiers, salts, and group parameters.
Example
SSLSRPVerifierFile "/path/to/file.srpv"
The verifier file can be created with the openssl
command line utility:
Creating the SRP verifier file
openssl srp -srpvfile passwd.srpv -userinfo "some info" -add username
The value given with the optional -userinfo
parameter is avalable in the SSL_SRP_USERINFO
request environment variable.
SSLStaplingCache Directive
Description: | Configures the OCSP stapling cache |
---|---|
Syntax: | SSLStaplingCache type |
Context: | server config |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
Configures the cache used to store OCSP responses which get included in the TLS handshake if SSLUseStapling
is enabled. Configuration of a cache is mandatory for OCSP stapling. With the exception of none
and nonenotnull
, the same storage types are supported as with SSLSessionCache
.
SSLStaplingErrorCacheTimeout Directive
Description: | Number of seconds before expiring invalid responses in the OCSP stapling cache |
---|---|
Syntax: | SSLStaplingErrorCacheTimeout seconds |
Default: | SSLStaplingErrorCacheTimeout 600 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
Sets the timeout in seconds before invalid responses in the OCSP stapling cache (configured through SSLStaplingCache
) will expire. To set the cache timeout for valid responses, see SSLStaplingStandardCacheTimeout
.
SSLStaplingFakeTryLater Directive
Description: | Synthesize "tryLater" responses for failed OCSP stapling queries |
---|---|
Syntax: | SSLStaplingFakeTryLater on|off |
Default: | SSLStaplingFakeTryLater on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
When enabled and a query to an OCSP responder for stapling purposes fails, mod_ssl will synthesize a "tryLater" response for the client. Only effective if SSLStaplingReturnResponderErrors
is also enabled.
SSLStaplingForceURL Directive
Description: | Override the OCSP responder URI specified in the certificate's AIA extension |
---|---|
Syntax: | SSLStaplingForceURL uri |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
This directive overrides the URI of an OCSP responder as obtained from the authorityInfoAccess (AIA) extension of the certificate. One potential use is when a proxy is used for retrieving OCSP queries.
SSLStaplingResponderTimeout Directive
Description: | Timeout for OCSP stapling queries |
---|---|
Syntax: | SSLStaplingResponderTimeout seconds |
Default: | SSLStaplingResponderTimeout 10 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
This option sets the timeout for queries to OCSP responders when SSLUseStapling
is enabled and mod_ssl is querying a responder for OCSP stapling purposes.
SSLStaplingResponseMaxAge Directive
Description: | Maximum allowable age for OCSP stapling responses |
---|---|
Syntax: | SSLStaplingResponseMaxAge seconds |
Default: | SSLStaplingResponseMaxAge -1 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
This option sets the maximum allowable age ("freshness") when considering OCSP responses for stapling purposes, i.e. when SSLUseStapling
is turned on. The default value (-1
) does not enforce a maximum age, which means that OCSP responses are considered valid as long as their nextUpdate
field is in the future.
SSLStaplingResponseTimeSkew Directive
Description: | Maximum allowable time skew for OCSP stapling response validation |
---|---|
Syntax: | SSLStaplingResponseTimeSkew seconds |
Default: | SSLStaplingResponseTimeSkew 300 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
This option sets the maximum allowable time skew when mod_ssl checks the thisUpdate
and nextUpdate
fields of OCSP responses which get included in the TLS handshake (OCSP stapling). Only applicable if SSLUseStapling
is turned on.
SSLStaplingReturnResponderErrors Directive
Description: | Pass stapling related OCSP errors on to client |
---|---|
Syntax: | SSLStaplingReturnResponderErrors on|off |
Default: | SSLStaplingReturnResponderErrors on |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
When enabled, mod_ssl will pass responses from unsuccessful stapling related OCSP queries (such as responses with an overall status other than "successful", responses with a certificate status other than "good", expired responses etc.) on to the client. If set to off
, only responses indicating a certificate status of "good" will be included in the TLS handshake.
SSLStaplingStandardCacheTimeout Directive
Description: | Number of seconds before expiring responses in the OCSP stapling cache |
---|---|
Syntax: | SSLStaplingStandardCacheTimeout seconds |
Default: | SSLStaplingStandardCacheTimeout 3600 |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
Sets the timeout in seconds before responses in the OCSP stapling cache (configured through SSLStaplingCache
) will expire. This directive applies to valid responses, while SSLStaplingErrorCacheTimeout
is used for controlling the timeout for invalid/unavailable responses.
SSLStrictSNIVHostCheck Directive
Description: | Whether to allow non-SNI clients to access a name-based virtual host. |
---|---|
Syntax: | SSLStrictSNIVHostCheck on|off |
Default: | SSLStrictSNIVHostCheck off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available in Apache 2.2.12 and later |
This directive sets whether a non-SNI client is allowed to access a name-based virtual host. If set to on
in the default name-based virtual host, clients that are SNI unaware will not be allowed to access any virtual host, belonging to this particular IP / port combination. If set to on
in any other virtual host, SNI unaware clients are not allowed to access this particular virtual host.
This option is only available if httpd was compiled against an SNI capable version of OpenSSL.
Example
SSLStrictSNIVHostCheck on
SSLUserName Directive
Description: | Variable name to determine user name |
---|---|
Syntax: | SSLUserName varname |
Context: | server config, directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
This directive sets the "user" field in the Apache request object. This is used by lower modules to identify the user with a character string. In particular, this may cause the environment variable REMOTE_USER
to be set. The varname can be any of the SSL environment variables.
Note that this directive has no effect if the FakeBasicAuth
option is used (see SSLOptions).
Example
SSLUserName SSL_CLIENT_S_DN_CN
SSLUseStapling Directive
Description: | Enable stapling of OCSP responses in the TLS handshake |
---|---|
Syntax: | SSLUseStapling on|off |
Default: | SSLUseStapling off |
Context: | server config, virtual host |
Status: | Extension |
Module: | mod_ssl |
Compatibility: | Available if using OpenSSL 0.9.8h or later |
This option enables OCSP stapling, as defined by the "Certificate Status Request" TLS extension specified in RFC 6066. If enabled (and requested by the client), mod_ssl will include an OCSP response for its own certificate in the TLS handshake. Configuring an SSLStaplingCache
is a prerequisite for enabling OCSP stapling.
OCSP stapling relieves the client of querying the OCSP responder on its own, but it should be noted that with the RFC 6066 specification, the server's CertificateStatus
reply may only include an OCSP response for a single cert. For server certificates with intermediate CA certificates in their chain (the typical case nowadays), stapling in its current implementation therefore only partially achieves the stated goal of "saving roundtrips and resources" - see also RFC 6961 (TLS Multiple Certificate Status Extension).
When OCSP stapling is enabled, the ssl-stapling
mutex is used to control access to the OCSP stapling cache in order to prevent corruption, and the sss-stapling-refresh
mutex is used to control refreshes of OCSP responses. These mutexes can be configured using the Mutex
directive.
SSLVerifyClient Directive
Description: | Type of Client Certificate verification |
---|---|
Syntax: | SSLVerifyClient level |
Default: | SSLVerifyClient none |
Context: | server config, virtual host, directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
This directive sets the Certificate verification level for the Client Authentication. Notice that this directive can be used both in per-server and per-directory context. In per-server context it applies to the client authentication process used in the standard SSL handshake when a connection is established. In per-directory context it forces a SSL renegotiation with the reconfigured client verification level after the HTTP request was read but before the HTTP response is sent.
The following levels are available for level:
- none: no client Certificate is required at all
- optional: the client may present a valid Certificate
- require: the client has to present a valid Certificate
-
optional_no_ca: the client may present a valid Certificate
but it need not to be (successfully) verifiable. This option cannot be relied upon for client authentication.
Example
SSLVerifyClient require
SSLVerifyDepth Directive
Description: | Maximum depth of CA Certificates in Client Certificate verification |
---|---|
Syntax: | SSLVerifyDepth number |
Default: | SSLVerifyDepth 1 |
Context: | server config, virtual host, directory, .htaccess |
Override: | AuthConfig |
Status: | Extension |
Module: | mod_ssl |
This directive sets how deeply mod_ssl should verify before deciding that the clients don't have a valid certificate. Notice that this directive can be used both in per-server and per-directory context. In per-server context it applies to the client authentication process used in the standard SSL handshake when a connection is established. In per-directory context it forces a SSL renegotiation with the reconfigured client verification depth after the HTTP request was read but before the HTTP response is sent.
The depth actually is the maximum number of intermediate certificate issuers, i.e. the number of CA certificates which are max allowed to be followed while verifying the client certificate. A depth of 0 means that self-signed client certificates are accepted only, the default depth of 1 means the client certificate can be self-signed or has to be signed by a CA which is directly known to the server (i.e. the CA's certificate is under SSLCACertificatePath
), etc.
Example
SSLVerifyDepth 10
Please login to continue.